TPS53126RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Weight | 45.387587mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53126 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 15A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Enable, Frequency Control |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 350kHz 700kHz |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Supply Current-Max (Isup) | 0.8mA |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 700kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53126RGET Overview
It comes in a 24-VFQFN Exposed Pad package, so switching controller can be used for most applications. This dc motor controller can be used to generate outputs with 2 numbers. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. Voltages 4.5V~24V are the dc control's supply voltage and operating voltage, respectively. Suitable for a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 350kHz 700kHz. The Surface Mount makes it ideal for general dc dc regulator. DCDC regulator is controlled efficiently by Enable, Frequency Control. DUAL SWITCHING CONTROLLER analog IC connects the switch converters. Terminal (s) of the switching converters are designed at the QUAD position. Different dc switching's functions can be applied to 24 terminations. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics will be returned if you search "TPS53126". In total, switching converter has 24 pins. Specifically, switching converter falls under the Switching Regulator or Controllers category. Test statistics indicate DC regulator outputs 5.5V voltage. You should note that the dc dc regulator's usual output current is 15A. There is a maximum frequency of 700kHz on this dc regulators. Hence, ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V is used to better suit the DC to DC voltage regulator's situation. Basically, it's a dc to dc voltage regulator from the D-CAP2? series. In dormant mode, 450μA is used. Since the dc switcher's maximum input voltage is 24V, the voltage must be regulated accordingly. Voltage 4.5V is necessary for the supply. An output current greater than 15A cannot be provided by the dc switcher. In order to ensure proper operation, the controller should not receive more current than 0.8mA. At its maximum output, the switching converter can provide 5.5V volts. A voltage controller's lowest output voltage cannot be less than 760mV.
TPS53126RGET Features
Transistor Driver Outputs
Switching Frequency: 350kHz 700kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
TPS53126RGET Applications
There are a lot of Texas Instruments TPS53126RGET DC to DC converter applications.
- Refrigerators of central air conditioners
- Special machining machine tools
- Energy management systems
- Communication system
- Television equipment
- Power supplies of electronic gadgets
- Overvoltage protection circuits in TV sets
- Correction machines
- Electrical power transmission
- Nuclear power plants
