TPS53127PW

24 Terminals 4.5V~24V 24-Pin TPS53127 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS53127PW
Package: 24-TSSOP (0.173, 4.40mm Width)
Datasheet: PDF
Stock: 905
Description: 24 Terminals 4.5V~24V 24-Pin TPS53127 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 5 days ago)
Mounting Type	Surface Mount
Package / Case	24-TSSOP (0.173, 4.40mm Width)
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tube
Series	D-CAP2™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	1 (Unlimited)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
Subcategory	Switching Regulator or Controllers
Terminal Position	DUAL
Terminal Form	GULL WING
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.65mm
Base Part Number	TPS53127
Function	Step-Down
Number of Outputs	2
Output Voltage	30V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	24V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Output Current	170mA
Voltage - Supply (Vcc/Vdd)	4.5V~24V
Quiescent Current	450μA
Output Power	310mW
Control Features	Current Limit, Enable, Soft Start
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Max Input Voltage	24V
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	0.8mA
Synchronous Rectifier	Yes
Min Output Voltage	760mV
Switcher Configuration	PUSH-PULL
Max Frequency	700kHz
Clock Sync	No
Duty Cycle	89 %
Output Phases	1
Height	1.2mm
Length	7.8mm
Width	4.4mm
Thickness	1mm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free

TPS53127PW Overview

The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. 2 outputs are supported by the dc motor controller. Tube solid enclosure protects the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). The supply and operating voltage of the dc control are 4.5V~24V. A -40°C~85°C TA dc switcher is not a problem. The Surface Mount allows it to be used for dc dc regulator in general. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Soft Start. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . Various 24 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 12V. Other relevant dc to dc converter ics will be returned if you search "TPS53127". There are a total of 24 pins on switching converter. In particular, switching converter belongs to the Switching Regulator or Controllers family. A 30V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 170mA, which should be noted down when you start a project. It is estimated that this dc regulatorhas a maximum frequency of 700kHz. As a result, DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V so that the need can be met more directly. To operate the voltage regulator dc to dc safely and reliably, users should apply 24V. The dc to dc voltage regulator belongs to the D-CAP2? series. In dormant mode, 450μA is used. In order to ensure the dc switcher's functionality, users must limit the voltage to 24V due to the dc switcher's maximum input voltage. The supply voltage must be 4.5V. Output current will not exceed 15A. You should not supply more current than 0.8mA to the controller. Datasheets state the switching converter can output up to 5.5V volts. 760mV voltage output is lower than 760mV.