TPS53127RGER

24 Terminals 4.5V~24V 24-Pin TPS53127 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver

Manufacturer: Texas Instruments
Nocochips NO: 815-TPS53127RGER
Package: 24-VFQFN Exposed Pad
Datasheet: PDF
Stock: 229
Description: 24 Terminals 4.5V~24V 24-Pin TPS53127 DC to DC converter ICDUAL SWITCHING CONTROLLER 2 Outputs Transistor Driver (Kg)

Details

Tags

Parameters
Base Part Number	TPS53127
Function	Step-Down
Number of Outputs	2
Output Voltage	5.5V
Output Type	Transistor Driver
Max Output Current	15A
Operating Supply Voltage	24V
Input Voltage-Nom	12V
Analog IC - Other Type	DUAL SWITCHING CONTROLLER
Output Configuration	Positive
Voltage - Supply (Vcc/Vdd)	4.5V~24V
Quiescent Current	450μA
Control Features	Current Limit, Enable, Soft Start
Max Output Voltage	5.5V
Topology	Buck
Min Input Voltage	4.5V
Control Mode	VOLTAGE-MODE
Max Input Voltage	24V
Control Technique	PULSE WIDTH MODULATION
Supply Current-Max (Isup)	0.8mA
Synchronous Rectifier	Yes
Min Output Voltage	760mV
Switcher Configuration	PUSH-PULL
Max Frequency	700kHz
Clock Sync	No
Duty Cycle	89 %
Output Phases	1
Height	1mm
Length	4mm
Width	4mm
Thickness	880μm
RoHS Status	ROHS3 Compliant
Lead Free	Lead Free
Factory Lead Time	1 Week
Lifecycle Status	ACTIVE (Last Updated: 1 day ago)
Mounting Type	Surface Mount
Package / Case	24-VFQFN Exposed Pad
Surface Mount	YES
Number of Pins	24
Operating Temperature	-40°C~85°C TA
Packaging	Tape & Reel (TR)
Series	D-CAP2™
JESD-609 Code	e4
Pbfree Code	yes
Part Status	Active
Moisture Sensitivity Level (MSL)	2 (1 Year)
Number of Terminations	24
ECCN Code	EAR99
Terminal Finish	Nickel/Palladium/Gold (Ni/Pd/Au)
Additional Feature	ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V
Subcategory	Switching Regulator or Controllers
Terminal Position	QUAD
Peak Reflow Temperature (Cel)	260
Terminal Pitch	0.5mm

TPS53127RGER Overview

With its 24-VFQFN Exposed Pad package, the switching controller fits the needs of most applications. For 2 outputs, the dc motor controller is appropriate. The pmic is packaged in Tape & Reel (TR) solid enclosure. A total of Transistor Driver dc switching's outputs can be handled by it. A 4.5V~24V voltage is supplied to the dc control and used for operating it. Work well in dc switchers with a -40°C~85°C TA. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Current Limit, Enable, Soft Start is included in the dcdc regulator. An analog IC DUAL SWITCHING CONTROLLER is connected to the switch converters. A switching converters's terminal (s) sits at the QUAD position. Different dc switching's functions can be applied to 24 terminations. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics will be returned if you search "TPS53127". 24 pins are present on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. A 5.5V voltage of DC regulator was detected in the test statistics. 700kHz is the maximum frequency of this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.76V TO 5.5V. To operate the voltage regulator dc to dc safely and reliably, users should apply 24V. Thare are switch converters of the D-CAP2? series. DC switchings that are dormant use 450μA. In order to limit the voltage of a dc switcher whose maximum input voltage is 24V, it must be limited by the user. Voltage 4.5V must be supplied. The dc switcher will not provide an output current greater than 15A. There should be 0.8mA current exceeding 0.8mA supplied to the controller. Its datasheet indicates the switching converter can output a maximum of 5.5V volts. There is 760mV voltage output lower than 760mV on the voltage controller.