TPS53128PW
| Parameters | |
|---|---|
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Current Limit, Enable, Soft Start |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 350kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53128 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
TPS53128PW Overview
The switching controller fits in the 24-TSSOP (0.173, 4.40mm Width) package and is ideal for most applications. dc motor controller is suitable for 2 output generation. Packaging for the pmic consists of Tube solid enclosures. With Transistor Driver dc switching's output (s), it is able to handle it. 4.5V~24V is the operating voltage and supply voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. dc dc regulators can be carried out with Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, Soft Start. Connected to a DUAL SWITCHING CONTROLLER analog IC, the switch converters are connected to a power supply. The switching converters's terminal (s) are designed at DUAL . An array of 24 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 5.5V. Search for "TPS53128" to find other relevant dc to dc converter ics. There are 24 pins on switching converter. Based on the test statistics, DC regulator outputs voltage 5.5V. This dc regulatorhas a max frequency of 350kHz. In order for the voltage regulator dc to dc to perform safely and reliably in a circuit, users are advised to apply 24V. A dc to dc voltage regulator in the D-CAP2? series, it belongs to this family. As long as the dc switching is in a dormant state, it utilizes 450μA. In order to ensure the dc switcher's functionality, users must limit the voltage to 24V due to the dc switcher's maximum input voltage. The supply voltage must be 4.5V. Input current cannot exceed 15A with this dc switcher. The datasheet indicates that the switching converter can output 5.5V volts at its maximum. Neither the voltage controller's lowest voltage output 760mVr its highest voltage output is less than 760mV.
TPS53128PW Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
TPS53128PW Applications
There are a lot of Texas Instruments TPS53128PW DC to DC converter applications.
- Overvoltage protection circuits in TV sets
- Production lines
- Access control systems
- Direct power supply system
- Servo drive system
- Packaging
- Textile machinery
- Network technology
- Fire elevators
- Low output voltage switching power supply circuits
