TPS53128PWR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-TSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53128 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Current Limit, Enable, Soft Start |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 350kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1.2mm |
| Length | 7.8mm |
| Width | 4.4mm |
| Thickness | 1mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53128PWR Overview
In the 24-TSSOP (0.173, 4.40mm Width) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 2. The pmic is packaged in Tape & Reel (TR) solid enclosure. There are Transistor Driver dc switching's output (s) that it can handle. This dc control operates at 4.5V~24V and has a 4.5V~24V supply voltage. Qualified to work in a -40°C~85°C TA dc switcher. dc dc regulator can be generalized using Surface Mount. Current Limit, Enable, Soft Start provides dcdc regulator efficient switching control. Thare switch converters are connected to an analog integrated circuit (IC) of type DUAL SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . Various 24 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. The DC switcher's nominal voltage is 5.5V. Other relevant dc to dc converter ics will be returned if you search "TPS53128". Pins number 24 of switching converter in total. A 5.5V voltage of DC regulator was detected in the test statistics. DC regulator's maximum frequency is 350kHz. If the user wishes to run the voltage regulator dc to dc in a circuit safely and reliably, they should apply 24V. It belongs to the D-CAP2? series of dc to dc voltage regulator. DC switching uses 450μA when it is dormant. The maximum input voltage of this dc switcher is 24V, so users must limit the voltage accordingly. A voltage of 4.5V must be present in the supply. There will be 15A output current greater than 15A from the dc switcher. Depending on the datasheet, the switching converter can output 5.5V volts at its peak. There is 760mV voltage output lower than 760mV on the voltage controller.
TPS53128PWR Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
TPS53128PWR Applications
There are a lot of Texas Instruments TPS53128PWR DC to DC converter applications.
- Pipe bending machines
- Network technology
- ATMs
- Experimental setup
- Packaging
- CNC system
- Shearing machines
- Power supplies of electronic gadgets
- Electric water heaters
- Electrical power transmission
