TPS53128RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53128 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Max Output Current | 15A |
| Operating Supply Voltage | 24V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 4.5V~24V |
| Quiescent Current | 450μA |
| Control Features | Current Limit, Enable, Soft Start |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 4.5V |
| Max Input Voltage | 24V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Switcher Configuration | PHASE-SHIFT |
| Max Frequency | 350kHz |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53128RGET Overview
It comes in a 24-VFQFN Exposed Pad package, so switching controller can be used for most applications. 2 outputs can be generated with the dc motor controller. There is a Tape & Reel (TR) solid enclosure around the pmic. There are Transistor Driver dc switching's output (s) that it can handle. 4.5V~24V is the supply voltage and the operating voltage of the dc control. Suitable for work in a -40°C~85°C TA dc switcher. As it has a Surface Mount value, it can be used for general dc dc regulator. The dcdc regulator features Current Limit, Enable, Soft Start for efficient switching control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. Thare switching converters has a terminal (s) at QUAD . 24 terminations with a variety of function. These dc dc converter ics adapt several control methods, including PULSE WIDTH MODULATION. It is inputted with a DC switcher's voltage of 5.5V. Searching "TPS53128" will return other relevant dc to dc converter ics. 24 pins are present on switching converter. Based on the test statistics, DC regulator outputs voltage 5.5V. 350kHz is the maximum frequency of this dc regulators. Users should apply 24V to operate the voltage regulator dc to dc safely and reliably. D-CAP2? is a series of dc to dc voltage regulator. DC switchings that are dormant use 450μA. In order to ensure the dc switcher's functionality, users must limit the voltage to 24V due to the dc switcher's maximum input voltage. A voltage of 4.5V must be present in the supply. Input current cannot exceed 15A with this dc switcher. The switching converter can output 5.5V volts at its utmost, according to the datasheet. A voltage controller's lowest output voltage cannot be less than 760mV.
TPS53128RGET Features
Transistor Driver Outputs
Current Limit, Enable, Soft Start
PULSE WIDTH MODULATION
TPS53128RGET Applications
There are a lot of Texas Instruments TPS53128RGET DC to DC converter applications.
- Computer rooms
- Surface processing equipment
- Access control systems
- Special machining machine tools
- Industrial controllers
- Ball screw pair
- Series voltage regulation circuits
- Medical equipment
- Serial communication converter
- Post equipment
