TPS53211RGTR
| Parameters | |
|---|---|
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 9.8V, ALSO OPERATES AS LDO REGULATOR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53211 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Quiescent Current | 400μA |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 440kHz |
| Max Duty Cycle | 70 % |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Digi-Reel® |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
TPS53211RGTR Overview
With a 16-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. There is enough capacity in the dc motor controller to generate the output for the 1 input. There is a Digi-Reel? solid enclosure around the pmic. With Transistor Driver dc switching's output (s), it is able to handle it. dc control's supply and operating voltages are 4.5V~14V. Qualified to work in a -40°C~85°C TA dc switcher. Using this switching controller, it is possible to switch at 250kHz~1MHz. dc dc regulators can be carried out with Surface Mount. Switching control is made easier with the dcdc regulator's Enable, Frequency Control, Phase Control, Power Good. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. A switching converters's terminal (s) sits at the QUAD position. Various 16 terminations. The control methods that these dc dc converter ics use include PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. Other relevant dc to dc converter ics can be found by searching "TPS53211". In total, switching converter has 16 pins. Input voltage of dc dc voltage regulator must be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 800mV. In most cases, the output current of the dc dc regulator will be 20A, so note that when you start the project. It is set to 70 % duty cycle to ensure voltage regulator dc to dc reliability during power-ups and power-downs. This Surface Mount makes DC switcher suitable for most prototypes and applications. DC regulator's maximum frequency is 440kHz. This value is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 9.8V, ALSO OPERATES AS LDO REGULATOR so that DC to DC voltage regulator better serves the purpose. In a dormant state, the dc switching uses 400μA.
TPS53211RGTR Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 70 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 9.8V, ALSO OPERATES AS LDO REGULATOR
TPS53211RGTR Applications
There are a lot of Texas Instruments TPS53211RGTR DC to DC converter applications.
- Plate bending machines
- Sensitive electronic devices
- Geothermal power
- Energy management systems
- Alternators
- Packaging
- Various CNC machine tools
- Smoke prevention equipment
- Current source circuits
- Elevator lighting
