TPS53211RGTT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 9.8V, ALSO OPERATES AS LDO REGULATOR |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53211 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 800mV |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 20A |
| Voltage - Supply (Vcc/Vdd) | 4.5V~14V |
| Quiescent Current | 400μA |
| Control Features | Enable, Frequency Control, Phase Control, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 250kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 440kHz |
| Max Duty Cycle | 70 % |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53211RGTT Overview
With a 16-VFQFN Exposed Pad package, the switching controller is suitable for a wide range of applications. The dc motor controller is adquate to generate for 1 outputs. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. Voltages 4.5V~14V are the dc control's supply voltage and operating voltage, respectively. Worked in an dc switcher with a -40°C~85°C TA rating. The switching controller can be switched at 250kHz~1MHz. The Surface Mount makes it ideal for general dc dc regulator. Featured in the dcdc regulator is Enable, Frequency Control, Phase Control, Power Good which allows efficient switching control. A SWITCHING CONTROLLER analog integrated circuit is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. Different dc switching's functions can be applied to 16 terminations. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. Other relevant dc to dc converter ics will be returned if you search "TPS53211". Total pins of switching converter are 16. It is recommended that the dc dc voltage regulator's minimum input voltage be 4.5V. DC regulator outputs 800mV voltage according to the test statistics. It's important to remember that the dc dc regulator's normaloutput current is 20A, so you should note it down when starting a new project. As a result of this, the maximum duty cycle of the voltage regulator dc to dc must remain 70 % during power-up and power-down. In most applications and prototype designs, DC switcher is qualified as a Surface Mount. 440kHz is the maximum frequency of this dc regulators. For better satisfaction, the value of DC to DC voltage regulator is ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 9.8V, ALSO OPERATES AS LDO REGULATOR. A dc switching in a dormant state uses 400μA.
TPS53211RGTT Features
Transistor Driver Outputs
Switching Frequency: 250kHz~1MHz
Enable, Frequency Control, Phase Control, Power Good
PULSE WIDTH MODULATION
Max Duty Cycle: 70 %
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.8 TO 9.8V, ALSO OPERATES AS LDO REGULATOR
TPS53211RGTT Applications
There are a lot of Texas Instruments TPS53211RGTT DC to DC converter applications.
- Arc suppression circuits
- Electric heating, lighting
- Correction machines
- Communication system
- Household control circuits
- Electrical distribution systems
- CNC system
- Product burn-in
- Scientific testing
- Digital video recorders
