TPS53624RHAR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 40-VFQFN Exposed Pad |
| Number of Pins | 40 |
| Operating Temperature | -10°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP+™, Eco-Mode™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 40 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53624 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 1.7V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50A |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Quiescent Current | 4mA |
| Control Features | Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Frequency - Switching | 200kHz 300kHz 400kHz 500kHz |
| Input Voltage (Max) | 5.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Clock Sync | No |
| Height | 1mm |
| Length | 6mm |
| Width | 6mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53624RHAR Overview
Capsuled in the 40-VFQFN Exposed Pad package, the switching controller suits most application needs. There is sufficient capacity to generate switching controller for outputs 2. A solid enclosure of Tape & Reel (TR) surrounds pmic. It is capable of handling Transistor Driver dc switching's outputs (s). This dc control has a supply voltage and operating voltage of 3V~28V. Qualified to work in a -10°C~105°C TA dc switcher. The switching controller can be switched at 200kHz 300kHz 400kHz 500kHz. A generalization of dc dc regulator can be made using Surface Mount. In order to control switching efficiently, the dcdc regulator features Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control. A DUAL SWITCHING CONTROLLER analog IC is connected to the switch converters. There are a terminal (s) on the switching converters that are designed at QUAD. An array of 40 terminations of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. DC switcher's input voltageis 5V volts. Search for "TPS53624" to find other relevant dc to dc converter ics. 40 pins are on switching converter. 4.5V should be the minimum input voltage for the dc dc voltage regulator. Test statistics indicate DC regulator outputs 1.7V voltage. Considering the dc to dc regulator can only accept 5.5V input voltage, it is important to take note of this. In most cases, the dc dc regulator's output current is 50A. This information should be noted when you begin working with the component. DC switcher's Surface Mount makes it qualified for most application and prototype designs. DC switcher'sThere are several dc to dc voltage regulator in the D-CAP+?, Eco-Mode? series. During dormancy, the dc switching uses 4mA.
TPS53624RHAR Features
Transistor Driver Outputs
Switching Frequency: 200kHz 300kHz 400kHz 500kHz
Current Limit, Enable, On Time Control, Phase Control, Power Good, Slew Control
PULSE WIDTH MODULATION
TPS53624RHAR Applications
There are a lot of Texas Instruments TPS53624RHAR DC to DC converter applications.
- Hydro power
- Refrigerators of central air conditioners
- Geothermal power
- Terrestrial set-top boxes
- Product testing
- Gear/thread machining machines
- Electric heating, lighting
- Electrical distribution systems
- Program control systems
- Linear guide
