TPS53632RSMT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 32-VFQFN Exposed Pad |
| Number of Pins | 32 |
| Weight | 72.206235mg |
| Operating Temperature | -10°C~105°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP+™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 32 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | DAC OUTPUT RANGE IS 0.50 TO 1.52V |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS53632 |
| Function | Step-Down |
| Number of Outputs | 3 |
| Output Voltage | 3.5V |
| Output Type | PWM Signal |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Operating Supply Current | 3.6mA |
| Output Configuration | Positive |
| Output Current | 90A |
| Voltage - Supply (Vcc/Vdd) | 2.5V~24V |
| Quiescent Current | 6mA |
| Control Features | Enable, Frequency Control, Power Good, Ramp |
| Input Voltage (Min) | -0.1V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 300kHz~1MHz |
| Input Voltage (Max) | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Isolation | Isolated |
| Serial Interfaces | I2C |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 900μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS53632RSMT Overview
Capsuled in the 32-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. 3 outputs can be generated with the dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. The system can process PWM Signal dc switching's outputs (s). A 2.5V~24V voltage is supplied to the dc control and used for operating it. Qualified to work in a -10°C~105°C TA dc switcher. The switching controller is capable of switching at the 300kHz~1MHz position. dc dc regulators can be carried out with Surface Mount. For efficient switching control, the dcdc regulator features Enable, Frequency Control, Power Good, Ramp. The switch converters are connected to an analog IC with a DUAL SWITCHING CONTROLLER output. The switching converters's terminals (s) are designed at QUAD. An array of 32 terminations of dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. DC switcher's input voltageis 12V volts. You can find other relevant dc to dc converter ics by searching "TPS53632". 32 pins are present on switching converter. An input voltage of -0.1V is the minimum required for the dc dc voltage regulator. Statistically, DC regulator outputs 3.5V volts. The dc to dc regulator can only accept 28V input voltage. If you start a project, note down the dc dc regulator's usual output current of 90A. Because of DC switcher's Surface Mount, it is suitable for most prototype designs and applications. Hence, DAC OUTPUT RANGE IS 0.50 TO 1.52V is used to better suit the DC to DC voltage regulator's situation. The dc to dc voltage regulator is from the D-CAP+? series. In dormant mode, 6mA is used. A supply current of 3.6mA is used to power it.
TPS53632RSMT Features
PWM Signal Outputs
Switching Frequency: 300kHz~1MHz
Enable, Frequency Control, Power Good, Ramp
PULSE WIDTH MODULATION
DAC OUTPUT RANGE IS 0.50 TO 1.52V
TPS53632RSMT Applications
There are a lot of Texas Instruments TPS53632RSMT DC to DC converter applications.
- Computer-related products
- Printing equipment
- Electric heating, lighting
- Medical monitoring systems
- Cutting machine tools
- Energy management systems
- CNC system
- Bending machines
- PSRR circuits
- Solar power plants
