TPS53819ARGTR
| Parameters | |
|---|---|
| Duty Cycle (Max) | 90% |
| Serial Interfaces | PMBus |
| Clock Sync | No |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Series | D-CAP2™, Eco-Mode™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE VOLTAGE MODE FROM 0.6V TO 5.5V |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS53819 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 28V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Quiescent Current | 920μA |
| Control Features | Enable, Power Good |
| Input Voltage (Min) | 4.5V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | Selectable |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 1MHz |
TPS53819ARGTR Overview
It comes in a 16-VFQFN Exposed Pad package, so switching controller can be used for most applications. 1 outputs are supported by the dc motor controller. Packaged in solid enclosures, this pmic has a Cut Tape (CT) rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). 3V~28V is the supply voltage and the operating voltage of the dc control. Qualified to work in a -40°C~85°C TA dc switcher. Switching can be done at Selectable with this switching controller. A generalization of dc dc regulator can be made using Surface Mount. To provide efficient switching control, Enable, Power Good is included in the dcdc regulator. The switch converters are connected to an analog IC with a SWITCHING CONTROLLER output. Terminal (s) of the switching converters are designed at the QUAD position. The 16 terminations can be used for a wide range of dc switching. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The nominal DC switcher's voltage input is 12V. In addition to "TPS53819", there are other relevant dc to dc converter ics you can find. Total pins of switching converter are 16. Switching converter is a special type of Switching Regulator or Controllers. It is recommended that the input voltage of the dc dc voltage regulator be 4.5V. The test statistics indicate that DC regulator outputs a voltage of 5.5V. This Surface Mount makes DC switcher suitable for most prototypes and applications. 1MHz is the maximum frequency of this dc regulators. The value of DC to DC voltage regulator is set to ALSO OPERATES IN ADJUSTABLE VOLTAGE MODE FROM 0.6V TO 5.5V in order to better satisfy the requirement. It is suggested that users apply 28V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. A dc to dc voltage regulator in the D-CAP2?, Eco-Mode? series, it belongs to this family. As long as the dc switching is in a dormant state, it utilizes 920μA.
TPS53819ARGTR Features
Transistor Driver Outputs
Switching Frequency: Selectable
Enable, Power Good
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE VOLTAGE MODE FROM 0.6V TO 5.5V
TPS53819ARGTR Applications
There are a lot of Texas Instruments TPS53819ARGTR DC to DC converter applications.
- Terrestrial set-top boxes
- Arc suppression circuits
- Nuclear power plants
- CMM
- Scientific research
- Telecommunications equipment
- Computer monitoring equipment of building
- Automation technology
- Post equipment
- Electric heating, lighting
