Parameters |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 4 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-VFDFN Exposed Pad |
Surface Mount |
YES |
Number of Pins |
10 |
Operating Temperature |
-40°C~150°C TJ |
Packaging |
Tape & Reel (TR) |
Series |
Eco-Mode™ |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS54060 |
Function |
Step-Down |
Number of Outputs |
1 |
Output Voltage |
58V |
Output Type |
Adjustable |
Max Output Current |
500mA |
Operating Supply Voltage |
60V |
Voltage - Input (Min) |
3.5V |
Input Voltage-Nom |
12V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Quiescent Current |
116μA |
Max Output Voltage |
58V |
Voltage - Output (Min/Fixed) |
0.8V |
Topology |
Buck, Split Rail |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
100kHz~2.5MHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Min Output Voltage |
800mV |
Voltage - Output (Max) |
58V |
Height |
1mm |
Length |
3mm |
Width |
3mm |
Thickness |
900μm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
TPS54060DRCR Overview
For optimal performance, this voltage regulator makes use of the Tape & Reel (TR) package. There are 10 terminations in this voltage regulator. There is a SWITCHING REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. The space-saving 10-VFDFN Exposed Pad package is available for this voltage regulator. There are 1 outputs configured on the voltage regulator. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. Surface Mount-mount switching regulator. Voltage regulators should be operated at -40°C~150°C TJ temperature while operating. 100kHz~2.5MHz is the switching frequency of this DC-DC switching regulator. Input voltage 3.5V is the dc to dc voltage regulator's minimum input voltage required for operation of the voltage regulators. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.8V. A regulator with this 260 peak reflow temperature is essentially indestructible. For operation, switching regulator requires a nominal input voltage of 12V. There is a subcategory of this regulator voltage called Switching Regulator or Controllers. As part of the TPS54060 series of regulators, the voltage regulators can be found. Voltage can be produced at 58V volts by voltage regulator. 10 pins are used for switching regulator operation. There should be at least a 800mV volt output voltage for this switching regulator in order to make it work properly. For switching regulator maximum operation, dc to dc voltage regulator delivers 500mA A. On the basis of 58V's maximal output voltage, DC DC switching regulator can be operated easily. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 58V. This voltage regulator belongs to the Eco-Mode? family and is known as a switching DC-DC regulator. Switching regulators operate at 60V supply voltages. No external factors affect how much current harley voltage regulator consumes.
TPS54060DRCR Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 60V
TPS54060DRCR Applications
There are a lot of Texas Instruments TPS54060DRCR Voltage Regulators applications.
- Current source circuits
- Sink circuits
- Direct power supply system
- Electrical distribution systems
- Wide-range voltage regulation circuits
- Driver circuits
- CMM
- Scientific testing
- Computer monitoring equipment of building
- Alternators