TPS54283PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 14-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 14 |
| Weight | 58.003124mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 14 |
| ECCN Code | EAR99 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS54283 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Efficiency | 85 % |
| Output Voltage | 25.2V |
| Output Type | Adjustable |
| Max Output Current | 2A |
| Operating Supply Voltage | 28V |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Quiescent Current | 1.8mA |
| Output Power | 1.6W |
| Max Output Voltage | 25.2V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 310kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 800mV |
| Switcher Configuration | PHASE-SHIFT |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS54283PWP Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 14 terminations. The type of analog IC that this voltage regulator is equipped with is DUAL SWITCHING CONTROLLER. Due to DC DC switching regulator's space saving design, this voltage regulator is available in a 14-PowerTSSOP (0.173, 4.40mm Width) package. DC DC switching regulator is configured with 2 outputs. There are output pins on this DC DC switching regulator that generate Adjustable output. Surface Mount-mounting is compatible with this switching regulator. This voltage regulator 12v should operate at a temperature of -40°C~85°C TA when operating. The switching frequency of this DC-DC switching regulator reaches 310kHz. The voltage regulator can be operated with a voltage as low as 4.5V as an input voltage. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 0.8V. Due to its 260 high peak reflow temperature, this voltage regulator 12v is virtually indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 12V for operation. As part of the TPS54283 series of regulators, the voltage regulators can be found. Voltage can be produced at 25.2V volts by voltage regulator. There are 14 pins that are used for the operation of the voltage regulator 12v. As a general rule, this voltage regulator 12v should keep its output voltage at least at 800mV. The maximum output current reaches 2A A to meet the switching regulator operation requirements. The maximum output voltage of this regulator voltage is 25.2V. Switching regulators such as this operate from voltages of 28V. There is no external influence on harley voltage regulator as it consumes 1.8mA A of quiescent current.
TPS54283PWP Features
2 outputs
Peak reflow temperature (Cel) of 260
14 pins
Operating supply voltage of 28V
TPS54283PWP Applications
There are a lot of Texas Instruments TPS54283PWP Voltage Regulators applications.
- Injection molding machinery
- Hydraulic presses
- Servo drive system
- Flaw detection equipment
- Hydro power
- Textile machinery
- Smoke prevention equipment
- Computer rooms
- Electrical power transmission
- Thermal power
