TPS5430DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 600kHz |
| Base Part Number | TPS5430 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 31V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Operating Supply Voltage | 36V |
| Input Voltage-Nom | 12V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Output Configuration | Positive |
| Quiescent Current | 3mA |
| Max Output Voltage | 31V |
| Voltage - Output (Min/Fixed) | 1.221V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.22V |
| Voltage - Output (Max) | 32.04V |
| Max Duty Cycle | 89 % |
| Max Junction Temperature (Tj) | 125°C |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5430DDA Description
The TPS5430 is a high-output-current PWM converter that integrates a low resistance high side N-channel MOSFET. Included on the substrate with the listed features are a high performance voltage error amplifier that provides tight voltage regulation accuracy under transient conditions; an undervoltage-lockout circuit to prevent start-up until the input voltage reaches 5.5 V; an internally set slow-start circuit to limit inrush currents; and a voltage feed-forward circuit to improve the transient response. Using the ENA pin, shutdown supply current is reduced to 18 μA typically. Other features include an active-high enable, overcurrent limiting, overvoltage protection and thermal shutdown. To reduce design complexity and external component count, the TPS5430 feedback loop is internally compensated. The TPS5430 regulates a wide variety of power sources including 24-V bus.
The TPS5430 device is available in a thermally enhanced, easy to use 8-pin SOIC PowerPADTM package. TI provides evaluation modules and the Designer software tool to aid in quickly achieving high-performance power supply designs to meet aggressive equipment development cycles.
TPS5430DDA Features
Wide Input Voltage Range: 5.5 V to 36 V
Up to 3-A Continuous (4-A Peak) Output Current
High Efficiency up to 95% Enabled by 110-mΩ Integrated MOSFET Switch
Wide Output Voltage Range: Adjustable Down to 1.22 V with 1.5% Initial Accuracy
Internal Compensation Minimizes External Parts Count
Fixed 500 kHz Switching Frequency for Small Filter Size
Improved Line Regulation and Transient Response by Input Voltage Feed Forward
System Protected by Overcurrent Limiting, Overvoltage Protection and Thermal Shutdown
-40 °C to 125 °C Operating Junction Temperature Range
Available in Small Thermally Enhanced 8-Pin SOlC PowerPADTM Package
TPS5430DDA Applications
Consumer: Set-top Box, DVD, LCD Displays
Industrial and Car Audio Power Supplies
Battery Chargers, High Power LED Supply
12-V/24-V Distributed Power Systems
5G Communication
Electrification of automobile
Industrial 4.0
