TPS54310PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Series | SWIFT™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Current Rating | 6.2A |
| Frequency | 700kHz |
| Base Part Number | TPS54310 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Adjustable |
| Max Output Current | 3A |
| Operating Supply Voltage | 6V |
| Voltage - Input (Min) | 3V |
| Input Voltage-Nom | 5.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 6.2mA |
| Output Power | 3.07W |
| Max Output Voltage | 3.3V |
| Voltage - Output (Min/Fixed) | 0.891V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 350kHz 550kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 900mV |
| Drain to Source Resistance | 85mOhm |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS54310PWP Overview
There is an optimized performance in this voltage regulator because it utilizes the Tube package. A voltage regulator consists of 20 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a 20-PowerTSSOP (0.173, 4.40mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. DC DC switching regulator is configured with 1 outputs. The adjusting voltage regulator generates Adjustable output. Surface Mount-mount switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~125°C TJ. 350kHz 550kHz is the switching frequency of this DC-DC switching regulator. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 3V. It is evident from the table below that adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.891V. As a result of the 260 peak reflow temperature, this regulator is essentially indestructible. An input voltage of 5.5V is required to meet the requirements of the switching regulator operation. As a member of the TPS54310 family of DC/DC regulators, this is a DC/DC regulator. At 3.3V volts, voltage regulator can provide voltage. In order to operate voltage regulator, there are 20 pins that must be connected. The output voltage of this voltage regulator 12v should at least be set at 900mV volts at all times. A maximum output current of 3A A is provided to meet the switching regulator operation requirements. An output voltage of 3.3V is provided by this regulator voltage. The switching DC-DC regulator belongs to the SWIFT? family of electronic voltage regulator 12vs. 6V is the supply voltage for this DC-DC switching regulator. No external factors affect how much current harley voltage regulator consumes. With a frequency of 700kHz, dc to dc voltage regulator has high accuracy.
TPS54310PWP Features
1 outputs
Peak reflow temperature (Cel) of 260
20 pins
Operating supply voltage of 6V
TPS54310PWP Applications
There are a lot of Texas Instruments TPS54310PWP Voltage Regulators applications.
- ATMs
- Hydraulic presses
- Motor controller circuits
- Industrial robots
- Alternators
- Servo drive system
- Fire elevators
- Refrigerators of central air conditioners
- Flexible manufacturing cells
- Lathes
