TPS5450DDA
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-PowerSOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Weight | 70.590313mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 500kHz |
| Base Part Number | TPS5450 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Efficiency | 90 % |
| Output Voltage | 31V |
| Output Type | Adjustable |
| Max Output Current | 5A |
| Operating Supply Voltage | 36V |
| Max Supply Voltage | 36V |
| Min Supply Voltage | 5.5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 3mA |
| Output Configuration | Positive |
| Quiescent Current | 3mA |
| Max Output Voltage | 31V |
| Voltage - Output (Min/Fixed) | 1.221V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 1.22V |
| Voltage - Output (Max) | 31.32V |
| Max Duty Cycle | 89 % |
| Max Junction Temperature (Tj) | 125°C |
| Height | 1.7mm |
| Length | 4.89mm |
| Width | 3.9mm |
| Thickness | 1.48mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS5450DDA Description
A low-resistance, high-side N-channel MOSFET is included into the TPS5450, a high-output-current PWM converter. A high-performance voltage error amplifier, an undervoltage lockout circuit, an internally set slow-start circuit to limit inrush currents, and a voltage feedforward circuit to enhance the transient response are all included on the substrate along with the aforementioned features. They also provide tight voltage regulation accuracy under transient conditions.
Shutdown supply current is normally decreased to 18 A using the ENA pin. An active-high enable, overcurrent limiting, overvoltage protection, and thermal shutdown are further features. The TPS5450 feedback loop is internally adjusted to lower design complexity and external component count.
TPS5450DDA Features
Wide input voltage range: 5.5 V to 36 V
Up to 5-A continuous (6-A peak) output current
High efficiency greater than 90% enabled by 110-m? integrated MOSFET switch
Wide output voltage range: adjustable down to 1.22 V with 1.5% initial accuracy
Internal compensation minimizes external part count
Fixed 500-kHz switching frequency for small filter size
18-μA shutdown supply current
Improved line regulation and transient response by input voltage feedforward
System protected by overcurrent limiting, overvoltage protection, and thermal shutdown
–40°C to 125°C operating junction temperature range
Available in small thermally enhanced 8-pin SOIC PowerPAD? package
TPS5450DDA Applications
High density point-of-load regulators
LCD displays, plasma displays
Battery chargers
12-V and 24-V distributed power systems
