TPS562210DDFT
| Parameters | |
|---|---|
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-8 Thin, TSOT-23-8 |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP2™, Eco-Mode™ |
| JESD-609 Code | e3 |
| Part Status | Not For New Designs |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS562210 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Voltage - Input (Max) | 17V |
| Output Voltage | 7V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 4.5V |
| Input Voltage-Nom | 12V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 2A |
| Quiescent Current | 230μA |
| Max Output Voltage | 7V |
| Voltage - Output (Min/Fixed) | 0.76V |
| Topology | Buck |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 650kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 765mV |
| Length | 2.9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS562210DDFT Overview
A Tape & Reel (TR) package is used in this voltage regulator to optimize performance. This harley voltage regulator has 8 terminations. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHING REGULATOR-type IC. There is a SOT-23-8 Thin, TSOT-23-8 package available for this voltage regulator, as DC DC switching regulator is space-saving. The voltage regulator 12v has 1 outputs. DC DC switching regulators like this one generate Adjustable outputs on their output pins to handle the power management. A Surface Mount mounting is required for this switching regulator. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. A DC-DC switching regulator such as this one switches at 650kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. As shown in the table below, adjusting voltage regulator's output voltage (Min/Fixed) is equal to 0.76V. A maximum design flexibility is provided by the 2A output current of voltage regulator. There is a voltage regulator maximum input voltage of 17V. To meet the operation requirements, voltage regulator is designed to provide 12V as the nominal input voltage. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. The TPS562210 family of DC/DC regulators includes this DC/DC regulator. At 7V volts, voltage regulator can provide voltage. The switching regulator operation of the system is controlled by 8 pins. As a general rule, this voltage regulator 12v should keep its output voltage at least at 765mV. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 7V, which is the highest available. A switching DC-DC regulator, it is a member of the D-CAP2?, Eco-Mode? family of electronic voltage regulator 12vs. There are no external factors that affect DC DC switching regulator's consumption of 230μA A of quiescent current.
TPS562210DDFT Features
1 outputs
8 pins
TPS562210DDFT Applications
There are a lot of Texas Instruments TPS562210DDFT Voltage Regulators applications.
- Radio equipment
- Digital display device
- Serial communication converter
- Combined machine tools
- Surface processing equipment
- Ball screw pair
- Sensitive electronic devices
- Flaw detection equipment
- Packaging
- Direct power supply system
