TPS59124RGET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Series | D-CAP™ |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS59124 |
| Function | Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 5.5V |
| Output Type | Transistor Driver |
| Operating Supply Voltage | 5.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Operating Supply Current | 350μA |
| Output Configuration | Positive |
| Voltage - Supply (Vcc/Vdd) | 3V~28V |
| Quiescent Current | 400μA |
| Control Features | Enable, On Time Control, Power Good |
| Max Output Voltage | 5.5V |
| Topology | Buck |
| Min Input Voltage | 3V |
| Frequency - Switching | Selectable |
| Max Input Voltage | 28V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 760mV |
| Max Frequency | 420kHz |
| Isolation | Non-Isolated |
| Clock Sync | No |
| Duty Cycle | 89 % |
| Output Phases | 1 |
| Height | 1mm |
| Length | 4mm |
| Width | 4mm |
| Thickness | 880μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS59124RGET Overview
Capsuled in the 24-VFQFN Exposed Pad package, the switching controller can be used for a wide range of applications. It is sufficient to generate 2 outputs with this dc motor controller. The pmic is packaged in Tape & Reel (TR) solid enclosure. Transistor Driver dc switching's outputs (s) are supported. Voltages 3V~28V are the dc control's supply voltage and operating voltage, respectively. Work well in dc switchers with a -40°C~85°C TA. The switching controller can be switched at Selectable. The Surface Mount allows it to be used for dc dc regulator in general. The dcdc regulator features Enable, On Time Control, Power Good for efficient switching control. Switch converters are connected to ICs with SWITCHING CONTROLLER analog outputs. QUAD are the position of the terminal of the switching converters. The 24 terminations can be used for a wide range of dc switching. Some of the control techniques adapted by these dc dc converter ics include PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. In addition to "TPS59124", there are other relevant dc to dc converter ics you can find. 24 pins are present on switching converter. As determined by the test statistics, the output voltage of DC regulator is 5.5V. This dc regulatorhas a max frequency of 420kHz. A circuit should contain 5.5V in order to ensure the voltage regulator dc to dc runs safely and reliably. D-CAP? series dc to dc voltage regulator belong to this series. During dormancy, the dc switching uses 400μA. The dc switcher's maximum input voltage is 28V, so users must limit the voltage accordingly. In order to use a 3V voltage supply, switching controller is necessary to have one. As per its datasheet, the switching converter has a maximum output of 5.5V volts. A supply current of 350μA is used to power it. Neither the voltage controller's lowest voltage output 760mVr its highest voltage output is less than 760mV.
TPS59124RGET Features
Transistor Driver Outputs
Switching Frequency: Selectable
Enable, On Time Control, Power Good
PULSE WIDTH MODULATION
TPS59124RGET Applications
There are a lot of Texas Instruments TPS59124RGET DC to DC converter applications.
- Nuclear power plants
- Ball screw pair
- Television equipment
- Milling machines
- Product testing
- seismic instrument power circuits
- Industrial robots
- Motor controller circuits
- Computer monitoring equipment of building
- Machining centers
