TPS60120PWP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 20-PowerTSSOP (0.173, 4.40mm Width) |
| Surface Mount | YES |
| Number of Pins | 20 |
| Weight | 81.788374mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 20 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.65mm |
| Frequency | 320kHz |
| Base Part Number | TPS60120 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 200mA |
| Input Voltage-Nom | 2V |
| Max Supply Voltage | 3.6V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Current - Output | 200mA |
| Quiescent Current | 55μA |
| Max Output Voltage | 3.43V |
| Topology | Charge Pump |
| Control Mode | CURRENT-MODE |
| Synchronous Rectifier | No |
| Nominal Input Voltage | 3.6V |
| Min Output Voltage | 3.17V |
| Switcher Configuration | DOUBLER INVERTER |
| Nominal Output Voltage | 3.3V |
| Height | 1.2mm |
| Length | 6.5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60120PWP Overview
For optimal performance, this voltage regulator uses the Tube package. There are 20 terminations in this voltage regulator. A SWITCHED CAPACITOR REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 20-PowerTSSOP (0.173, 4.40mm Width) package to save space. There are 1 outputs on DC DC switching regulator. This DC DC switching regulator generates Fixed output on its output pins. Surface Mount-mounting is compatible with this switching regulator. During switching regulator operation, the operating temperature should remain at -40°C~85°C TA. DC DC switching regulator's maximum design flexibility comes from its output current of 200mA. 260 is essentially indestructible due to DC DC switching regulator's peak reflow temperature. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 2V. The regulator voltage is included in the Other Analog ICs subcategory of voltage regulators. As a member of the TPS60120 family of DC/DC regulators, this is a DC/DC regulator. A voltage of 3.3V volts can be generated by DC DC switching regulator. The switching regulator operation of the system is controlled by 20 pins. The output voltage of this voltage regulator 12v should at least be set at 3.17V volts at all times. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 200mA A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 3.43V. Without external influences, harley voltage regulator consumes 55μAA of quiescent current. In this case, a dc to dc voltage regulator's minimum supply voltage of 1.8V volts is required to ensure reliable performance. As long as the supply voltage is greater than 3.6V, the voltage regulator 12v will operate correctly. At a frequency of 320kHz, dc to dc voltage regulator is capable of maintaining high accuracy.
TPS60120PWP Features
1 outputs
Peak reflow temperature (Cel) of 260
20 pins
TPS60120PWP Applications
There are a lot of Texas Instruments TPS60120PWP Voltage Regulators applications.
- Solar power plants
- Hydraulic presses
- Printing equipment
- Computer rooms
- Balance equipment
- Printing
- Magnetohydrodynamic power
- Correction machines
- Wind power
- Smart grid
