TPS60151DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Additional Feature | ALSO OPERATES IN ADJUSTABLE MODE FROM 4.8V TO 5.2V |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Base Part Number | TPS60151 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Output Type | Fixed |
| Max Output Current | 140mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 2.7V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Output Configuration | Positive |
| Quiescent Current | 4.7mA |
| Max Output Voltage | 5.2V |
| Voltage - Output (Min/Fixed) | 5V |
| Topology | Charge Pump |
| Frequency - Switching | 1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Min Output Voltage | 4.8V |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60151DRVT Overview
There is an optimized performance in this voltage regulator because it utilizes the Tape & Reel (TR) package. A voltage regulator consists of 6 terminations. There is a SWITCHED CAPACITOR REGULATOR type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 6-WDFN Exposed Pad package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs configured on the voltage regulator. On its output pins, this adjusting voltage regulator generates Fixed output. This switching regulator is designed to fit the Surface Mount mounting system. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. DC-DC switching regulators reach 1.5MHz switching frequencies. The adjusting voltage regulator's output voltage (Min/Fixed) is 5V. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 3.6V for operation. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. As part of the TPS60151 series of regulators, the voltage regulators can be found. There is a possibility that DC DC switching regulator can give voltage at 5V volts. To operate the voltage regulator 12v, 6 pins are required. The output voltage for this switching regulator should be kept at 4.8V at least. For switching regulator maximum operation, dc to dc voltage regulator delivers 140mA A. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5.2V. Without external influences, harley voltage regulator consumes 4.7mAA of quiescent current. The dc to dc voltage regulator's minimum supply voltage of 2.7V volts ensures reliable performance. ALSO OPERATES IN ADJUSTABLE MODE FROM 4.8V TO 5.2V-switching regulators provide efficiency and stability. The maximum supply voltage for the voltage regulator 12v is 5.5V, so DC DC switching regulator can operate with a maximum voltage of 5.5V.
TPS60151DRVT Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
ALSO OPERATES IN ADJUSTABLE MODE FROM 4.8V TO 5.2V
TPS60151DRVT Applications
There are a lot of Texas Instruments TPS60151DRVT Voltage Regulators applications.
- Electrical power transmission
- Medical equipment
- Post equipment
- Radio equipment
- Surface processing equipment
- Communication system
- Production lines
- Surge protection circuits
- Digital precision reference circuits
- Computed tomography (CT)
