TPS60230RGTT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Weight | 24.097095mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS60230 |
| Pin Count | 16 |
| Number of Outputs | 5 |
| Max Output Current | 125mA |
| Input Voltage-Nom | 3.6V |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 2.7V |
| Output Current | 125mA |
| Quiescent Current | 200μA |
| Voltage - Output | 5.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 2.7V |
| Max Input Voltage | 6.5V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | DOUBLER INVERTER |
| Current - Output / Channel | 25mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Touchscreen | Capacitive |
| Efficiency (Main Output) | 90% |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60230RGTT Overview
Its 16-VFQFN Exposed Pad package is used to save board space. For the design of this LED driver, 5 outputs are used.It is possible to mount the led driver using Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.The led light driver is capable of working normally at -40°C~85°C TA.Backlight has many benefits.It operates with 16 terminations.The LED light driver is configured with a base of 0 pins.It is under the base part number TPS60230 that you can find this LED driver.It is acceptable to supply voltages of 6.5V.There is a voltage output of 5.5V.On it, there are 16 pins.At its minimal input voltage, it operates at 2.7V.As a result, it is designed to operate at a minimal voltage of 2.7V to ensure the most efficiency possible.The maximum value of supply current is 6.5V.In this case, the load can only be supplied with 125mA current.Having the switching frequency at 1MHz enables this electronic component to perform at its best.When operating at the maximum output current of 125mA, it is capable of providing all the benefits associated with LED drivers.No external factors cause 200μA current to be consumed.A circuit operated by the device has 3.6V volts.
TPS60230RGTT Features
Available in the 16-VFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz
TPS60230RGTT Applications
There are a lot of Texas Instruments TPS60230RGTT LED Driver ICs applications.
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Architectural lighting
- A- lamps
- LED Lightings for Inspection Devices
- Refrigeration lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Sports Facility Lighting
- Museum lighting
- General lighting
- Down lighting
