TPS60250RTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2.05W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS60250 |
| Pin Count | 16 |
| Number of Outputs | 7 |
| Max Output Current | 230mA |
| Input Voltage-Nom | 3.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 6.7mA |
| Power Dissipation | 821mW |
| Output Current | 230mA |
| Max Supply Current | 6.7mA |
| Quiescent Current | 68μA |
| Voltage - Output | 6.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 6V |
| Switcher Configuration | BOOST |
| Internal Switch(s) | Yes |
| High Level Output Current | 230mA |
| Dimming | I2C |
| Number of Segments | 6 |
| Switching Frequency | 750kHz |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60250RTER Overview
On the board, there is also a 16-WFQFN Exposed Pad package that saves space.A LED driver with 7 outputs is designed.As far as mounting is concerned, Surface Mount is adopted.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.There are significant benefits for Backlight.It operates with 16 terminations.There are 16 pins on its base.There are estimated to be 6 segments.This LED driver can be found under the base part number TPS60250.It is acceptable to have a maximum voltage of 6V.There is 6.5V voltage output from it.The device has 16 pins.The minimum input voltage for this device is 3V.It is designed to operate at a minimal voltage of 3V to achieve the highest efficiency.In the case of supply current, there is a maximum value of 6V.As long as the supply current is less than 6.7mA, this device can provide high efficiency.A load can be supplied with 230mA current.When the switching frequency is maintained at 750kHz, this electronic component is able to fully play its functions.A LED driver that operates at 230mA output current provides all the benefits of a LED driver.The consumption of current is 68μAin the absence of external factors.When using the device, there is a voltage of 3.5V volts assigned to the circuit.
TPS60250RTER Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 750kHz
TPS60250RTER Applications
There are a lot of Texas Instruments TPS60250RTER LED Driver ICs applications.
- High-end retail lighting
- OLED power supply for portable equipment
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- White LED Backlight for portable equipment
- Gallery lighting
- Constant Voltage Power Source for portable equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- LED headlights
- Medical surgery lighting
- LED Lighting PFCs, Linear Dimmable
