TPS60250RTERG4
| Parameters | |
|---|---|
| Package / Case | QFN |
| Surface Mount | YES |
| Number of Pins | 16 |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Moisture Sensitivity Level (MSL) | 2 |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| HTS Code | 8542.39.00.01 |
| Subcategory | Other Analog ICs |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Pin Count | 16 |
| Number of Outputs | 7 |
| Max Output Current | 230mA |
| Input Voltage-Nom | 3.5V |
| Temperature Grade | INDUSTRIAL |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Power Dissipation-Max | 2.05W |
| Nominal Supply Current | 6.7mA |
| Power Dissipation | 2.05W |
| Current - Output | 230mA |
| Quiescent Current | 68μA |
| Voltage - Output | 6.5V |
| Topology | Boost |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 750kHz |
| Max Input Voltage | 6V |
| Number of Segments | 6 |
| Height Seated (Max) | 0.8mm |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Contains Lead |
TPS60250RTERG4 Overview
To save space on the board, it has a QFN package. These LED drivers have 7 outputs.Based on the frequency of 750kHz, it operates on the basis of a pulse.16 terminations are designed for its operation.It has a base of 16 pins.It is estimated that there are 6 segments.The voltage of 6V is acceptable.There is 6.5V voltage output from the device.There are 16 pins on this device.Further, its characteristics allow it to be classified as Other Analog ICs.It operates with the minimal input voltage of 3V.For maximum efficiency, it requires a minimal supply voltage of 3V.It is possible to supply current up to 6V.Operating temperatures should not exceed 85°C in order to ensure stable operation.Stable operation requires a temperature higher than -40°C.When operating with a maximum output current of 230mA, it can deliver all the benefits of a LED driver.When no external factors are present, there is 68μA current consumption.When using the device, there is a voltage of 3.5V volts assigned to the circuit.There is a current of 230mA can be supplied to the load.This device utilizes analog IC of SWITCHED CAPACITOR CONVERTER.
TPS60250RTERG4 Features
Available in the QFN package
Frequency of 750kHz
TPS60250RTERG4 Applications
There are a lot of Texas Instruments TPS60250RTERG4 LED Driver ICs applications.
- Down lighting
- Auxiliary lights for on-vehicle cameras
- Panel lighting
- OLED power supply for portable equipment
- Medical surgery lighting
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Dimmable LED for vehicle interiors
- Museum lighting
- High-end retail lighting
