TPS60250RTET
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2.05W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS60250 |
| Pin Count | 16 |
| Number of Outputs | 7 |
| Max Output Current | 230mA |
| Input Voltage-Nom | 3.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 6.7mA |
| Power Dissipation | 821mW |
| Output Current | 230mA |
| Max Supply Current | 6.7mA |
| Quiescent Current | 68μA |
| Voltage - Output | 6.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 6V |
| Switcher Configuration | BOOST |
| Internal Switch(s) | Yes |
| High Level Output Current | 230mA |
| Dimming | I2C |
| Number of Segments | 6 |
| Switching Frequency | 750kHz |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60250RTET Overview
Its 16-WFQFN Exposed Pad package is used to save board space. In this LED driver, there are 7 outputs.The mounting method is Surface Mount.Initially, it emerges as a DC DC Regulator with high efficiency and a high degree of reliability.The LED driver has the capability of operating at a temperature of -40°C~85°C TA.The benefits of Backlight are considerable.In this case, it uses 16 terminations.The LED light driver has a base configuration of 16 pins.The segment count is 6.Part number TPS60250 represents this LED driver.A maximum supply voltage of 6V is acceptable.6.5V is the voltage output.In this device, there are 16 pins.This device operates with a minimum input voltage of 3V volts.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.Supply current cannot exceed 6V.As long as the maximum supply current is under 6.7mA, it can deliver high efficiency.The load is capable of receiving 230mA current.It's possible for this electronic component to fully function when the switching frequency is maintained at 750kHz.When operating with a 230mA output current, the LED driver delivers all the benefits.In the absence of external factors, 68μA current is consumed.When using the device, there is a voltage of 3.5V volts assigned to the circuit.
TPS60250RTET Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 750kHz
TPS60250RTET Applications
There are a lot of Texas Instruments TPS60250RTET LED Driver ICs applications.
- Down lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- LED backlight driver for LCD displays for Tablets and Note PCs
- Medical surgery lighting
- Flicker-free LED Lighting using R1580N
- LED Lightings for Industrial Equipment
- LED Lighting PFCs, Linear Dimmable
- High-end retail lighting
- Other Electronic Devices
- LED Lightings for Inspection Devices
