TPS60251RTWR
| Parameters | |
|---|---|
| Mounting Type | Surface Mount |
| Package / Case | 24-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Obsolete |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2.646W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS60251 |
| Pin Count | 24 |
| Number of Outputs | 7 |
| Max Output Current | 230mA |
| Input Voltage-Nom | 3.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Nominal Supply Current | 6.7mA |
| Power Dissipation | 2.646W |
| Output Current | 230mA |
| Quiescent Current | 68μA |
| Voltage - Output | 6.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Max Input Voltage | 6V |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 14 |
| Switching Frequency | 750kHz |
| Touchscreen | Capacitive |
| Height Seated (Max) | 0.8mm |
| Length | 4mm |
| Width | 4mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60251RTWR Overview
It saves board space with the 24-WFQFN Exposed Pad package. This LED driver has 7 outputs.Surface Mount is used for mounting.In this case, it emerges as a DC DC Regulator with a high efficiency.-40°C~85°C TA is the operating temperature and it works fine.There are many benefits for Backlight.In this case, the terminations are set to 24.In this LED driver, the base is configured as 24.A total of 14 segments have been created.It is under the base part number TPS60251 that the LED driver can be found.It is acceptable for the supply voltage to be 6V.The output voltage of this device is 6.5V.In addition, it is equipped with a total of 24 pins.At a voltage of 3V, it operates at a minimal input voltage.In order to achieve highest efficiency standards, the supply voltage must be very low, preferably at 3V.There is 6V maximum value for supply current.230mA is the maximum amount of current that can be supplied to the load.This electronic component may perform its functions fully if the switching frequency is maintained at 750kHz.The maximum output current of 230mA allows it to deliver all benefits of a LED driver.The consumption of current is 68μAin the absence of external factors.A circuit operated by the device has 3.5V volts.
TPS60251RTWR Features
Available in the 24-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 750kHz
TPS60251RTWR Applications
There are a lot of Texas Instruments TPS60251RTWR LED Driver ICs applications.
- Museum lighting
- Industrial LED Lighting: Image Recognition Devices
- Sports Facility Lighting
- Dimmable LED for vehicle interiors
- LED backlight driver for LCD displays for portable equipment
- General lighting
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Down lights
- Street lighting
- Refrigeration lighting
