TPS60252RTER
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 2.05W |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 0.5mm |
| Frequency | 750kHz |
| Base Part Number | TPS60252 |
| Pin Count | 16 |
| Number of Outputs | 7 |
| Max Output Current | 230mA |
| Input Voltage-Nom | 3.5V |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 3V |
| Power Dissipation | 2.05W |
| Quiescent Current | 68μA |
| Voltage - Output | 6.5V |
| Topology | Switched Capacitor (Charge Pump) |
| Min Input Voltage | 3V |
| Control Mode | VOLTAGE-MODE |
| Max Input Voltage | 6V |
| Switcher Configuration | BOOST |
| Current - Output / Channel | 230mA |
| Internal Switch(s) | Yes |
| Dimming | I2C |
| Number of Segments | 6 |
| Touchscreen | Capacitive |
| Height | 800μm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60252RTER Overview
To save board space, it uses the 16-WFQFN Exposed Pad package. Typically, LED drivers have 7 outputs.As far as mounting is concerned, Surface Mount is adopted.With high reliability and efficiency, this emerges as a DC DC Regulator.-40°C~85°C TA is the operating temperature and it works fine.The benefits of Backlight are considerable.In the 750kHz frequency range, it operates.A termination of 16 is used to operate the LED driver.To form its configuration, 16 pins are used.A total of 6 segments are estimated.This LED driver can be found under the base part number TPS60252.It's acceptable for the voltage to be 6V.A voltage of 6.5V is produced by it.16 pins are on the device.A minimal input voltage of 3V is required for it to operate.For highest efficiency, it works with a minimal supply voltage of 3V.The maximum value of supply current is 6V.The maximum output current of 230mA allows it to deliver all benefits of a LED driver.In the absence of external factors, there is 68μA consumption of current.The circuit is assigned 3.5V volts when the device is in operation.
TPS60252RTER Features
Available in the 16-WFQFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 750kHz
TPS60252RTER Applications
There are a lot of Texas Instruments TPS60252RTER LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- White LED Backlight for portable equipment
- Down lighting
- Other Electronic Devices
- Gallery lighting
- Dimmable LED for vehicle interiors
- Linear fluorescent
- OLED power supply for portable equipment
- LED backlight driver for LCD displays for Tablets and Note PCs
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
