TPS60402DBVT
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 50kHz |
| Base Part Number | TPS60402 |
| Function | Ratiometric |
| Number of Outputs | 1 |
| Output Voltage | -5.25V |
| Output Type | Fixed |
| Max Output Current | 60mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 5.25V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
| Operating Supply Current | 275μA |
| Output Configuration | Positive or Negative |
| Quiescent Current | 120μA |
| Output Power | 437mW |
| Max Output Voltage | -5.25V |
| Voltage - Output (Min/Fixed) | -Vin 2Vin Vin/2 |
| Topology | Charge Pump |
| Logic Function | Inverting |
| Synchronous Rectifier | No |
| Min Output Voltage | -1.8V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
TPS60402DBVT Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. During the development of this harley voltage regulator, 5 terminations were made. There are two types of analog ICs on this voltage regulator. The first type is a SWITCHED CAPACITOR CONVERTER-type IC. In order to save space, this harley voltage regulator is available in the SC-74A, SOT-753 package. The voltage regulator is configured with 1 outputs. Fixed outputs are generated on the output pins of this adjusting voltage regulator. This voltage regulator 12v fits the Surface Mount mounting. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to -Vin 2Vin Vin/2. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. Voltage regulator is designed to provide a nominal input voltage of 5V to meet the operation requirements. In the particular voltage regulators, the TPS60402 family is represented. A voltage of -5.25V volts can be generated by DC DC switching regulator. The switching regulator operation is carried out by 5 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least -1.8V. A 60mA A maximum output current is required to meet the switching regulator operation requirements. Using this voltage regulator 12v, you will be able to get the maximum output voltage of -5.25V. Voltage regulator consumes 120μA A of quiescent current without being affected by outside forces. By requiring a minimum voltage of 1.8VV, adjusting voltage regulator reliable performance is guaranteed. A maximum supply voltage of 5.25V can be used to operate the voltage regulator 12v. At a frequency of 50kHz, dc to dc voltage regulator is capable of maintaining high accuracy. DC-DC switching regulators operate with 275μA supply currents.
TPS60402DBVT Features
1 outputs
Peak reflow temperature (Cel) of 260
5 pins
TPS60402DBVT Applications
There are a lot of Texas Instruments TPS60402DBVT Voltage Regulators applications.
- Digital precision reference circuits
- Direct power supply system
- Automatic testing equipment
- Plate bending machines
- Radio equipment
- Correction machines
- Access control systems
- Low output voltage switching power supply circuits
- Electrical power transmission
- Window air conditioners
