Parameters | |
---|---|
Factory Lead Time | 1 Week |
Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
Mounting Type | Surface Mount |
Package / Case | SC-74A, SOT-753 |
Surface Mount | YES |
Number of Pins | 5 |
Weight | 13.012431mg |
Operating Temperature | -40°C~125°C TJ |
Packaging | Tape & Reel (TR) |
Series | Automotive, AEC-Q100 |
JESD-609 Code | e4 |
Pbfree Code | yes |
Part Status | Active |
Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
Number of Terminations | 5 |
ECCN Code | EAR99 |
Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
Terminal Position | DUAL |
Terminal Form | GULL WING |
Peak Reflow Temperature (Cel) | 260 |
Base Part Number | TPS60403 |
Function | Ratiometric |
Number of Outputs | 1 |
Output Voltage | -5.25V |
Output Type | Fixed |
Max Output Current | 60mA |
Input Voltage-Nom | 5V |
Max Supply Voltage | 5.25V |
Min Supply Voltage | 1.8V |
Analog IC - Other Type | SWITCHED CAPACITOR CONVERTER |
Operating Supply Current | 700μA |
Output Configuration | Positive or Negative |
Quiescent Current | 425μA |
Max Output Voltage | -5.25V |
Voltage - Output (Min/Fixed) | -Vin 2Vin Vin/2 |
Topology | Charge Pump |
Logic Function | Inverting |
Frequency - Switching | 250kHz |
Synchronous Rectifier | No |
Min Output Voltage | -1.8V |
Switcher Configuration | DOUBLER INVERTER |
Height | 1.45mm |
Length | 2.9mm |
Width | 1.6mm |
Thickness | 1.2mm |
REACH SVHC | No SVHC |
RoHS Status | ROHS3 Compliant |
Lead Free | Lead Free |
From an input voltage of 1.8 V to 5.25 V, the TPS60403QDBVRQ1 provides an unregulated negative output voltage. The TPS60403QDBVRQ1 is commonly powered by a 5 V or 3.3 V pre-regulated supply rail. Two or three NiCd, NiMH, or alkaline battery cells, as well as one Li-Ion cell, can power them due to their wide input voltage range.
Qualified for Automotive Applications
AEC-Q100 Test Guidance With the Following Results:
Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
Device HBM ESD Classification Level 2
Device CDM ESD Classification Level C6
Inverts Input Supply Voltage
Up to 60-mA Output Current
Only Three Small 1-μF Ceramic Capacitors Needed
Input Voltage Range From 1.8 V to 5.25 V
PowerSave-Mode for Improved Efficiency at Low Output Currents (TPS60400-Q1)
Device Quiescent Current Typical: 100 μA
Integrated Active Schottky-Diode for Start-Up Into Load
Small 5-Pin SOT23 Package
Evaluation Module Available: TPS60400EVM-178
Automotive Infotainment
LCD Displays
Automotive Cluster
Negative Supply Voltages