TPS60501DGS
| Parameters | |
|---|---|
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS60501 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 250mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Operating Supply Current | 40μA |
| Output Configuration | Positive |
| Quiescent Current | 40μA |
| Output Power | 555mW |
| Max Output Voltage | 3.3V |
| Topology | Charge Pump |
| Frequency - Switching | 800kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 3.3V |
| Switcher Configuration | DOUBLER INVERTER |
| Nominal Output Voltage | 3.3V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
TPS60501DGS Overview
This harley voltage regulator utilizes the Tube package for optimized performance. A voltage regulator consists of 10 terminations. There are two types of analog ICs in this voltage regulator 12v: SWITCHED CAPACITOR REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space-saving 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) packages are available for this harley voltage regulator. DC DC switching regulator is configured with 1 outputs. This DC DC switching regulator generates Fixed output on its output pins. This switching regulator is designed to fit the Surface Mount mounting system. This voltage regulator 12v should operate at a temperature of -40°C~125°C TJ when operating. DC-DC switching regulators reach 800kHz switching frequencies. The peak reflow temperature of this regulator amounts to 260 to be essentially indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 5V for operation. In terms of category, this voltage regulator 12v falls into the Other Analog ICs category. This DC/DC regulator belongs to the TPS60501 family. A voltage of 3.3V volts can be generated by DC DC switching regulator. The switching regulator operation is carried out by 10 pins. Ideally this switch regulator should have an output voltage of about 3.3V at the very least. To meet its operating requirements, dc to dc voltage regulator can deliver a maximum output current of 250mA A. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 3.3V. An external factor does not affect harley voltage regulator's ability to consume 40μA A of quiescent current. In order to ensure reliable performance, a dc to dc voltage regulator's minimum supply voltage of 1.8V V is required. DC DC switching regulator can be operated from a voltage of 6.5V as its maximum supply voltage. DC-DC switching regulators operate with 40μA supply currents. In order to be suitable for running at 5V volts, this voltage regulator dc to dc needs to be powered by a 5V V battery.
TPS60501DGS Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
TPS60501DGS Applications
There are a lot of Texas Instruments TPS60501DGS Voltage Regulators applications.
- Analog precision reference circuits
- Computer-related products
- Flaw detection equipment
- Elevator lighting
- Grinders
- Industrial robots
- PSRR circuits
- Current source circuits
- Production lines
- Computer application technology
