TPS60501DGSR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 18.795734mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Other Analog ICs |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS60501 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Max Output Current | 250mA |
| Input Voltage-Nom | 5V |
| Max Supply Voltage | 6.5V |
| Min Supply Voltage | 1.8V |
| Analog IC - Other Type | SWITCHED CAPACITOR REGULATOR |
| Nominal Supply Current | 40μA |
| Output Configuration | Positive |
| Quiescent Current | 40μA |
| Max Output Voltage | 3.3V |
| Topology | Charge Pump |
| Frequency - Switching | 800kHz |
| Synchronous Rectifier | No |
| Min Output Voltage | 3.3V |
| Switcher Configuration | DOUBLER INVERTER |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS60501DGSR Overview
optimized performance is achieved by utilizing the Tape & Reel (TR) package in this voltage regulator. In this voltage regulator, there are 10 terminations. A SWITCHED CAPACITOR REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. For space-saving purposes, this voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. 1 outputs have been configured in the voltage regulator 12v. This DC DC switching regulator generates Fixed output on its output pins. There is a switching regulator that is compatible with the Surface Mount mounting. In order for it to operate properly, dc to dc voltage regulator's operating temperature should be at -40°C~125°C TJ. A DC-DC switching regulator such as this one switches at 800kHz. A regulator with this 260 peak reflow temperature is essentially indestructible. An input voltage of 5V is required for switching regulator operation. I would like to point out that this voltage regulator belongs to the Other Analog ICs subcategory. As a member of the TPS60501 family of DC/DC regulators, this is a DC/DC regulator. At 3.3V volts, voltage regulator can provide voltage. To operate the voltage regulator 12v, 10 pins are required. The output voltage for this switching regulator should be kept at 3.3V at least. The maximum output current reaches 250mA A to meet the switching regulator operation requirements. An output voltage of 3.3V is provided by this regulator voltage. There are no external factors that affect DC DC switching regulator's consumption of 40μA A of quiescent current. Adjusting voltage regulator reliable performance is ensured based on the minimal supply voltage of 1.8V V. The maximum supply voltage for the voltage regulator 12v is 6.5V, so DC DC switching regulator can operate with a maximum voltage of 6.5V. This voltage regulator is suitable for running at a 5V V supply.
TPS60501DGSR Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
TPS60501DGSR Applications
There are a lot of Texas Instruments TPS60501DGSR Voltage Regulators applications.
- Experimental setup
- Product burn-in
- PSRR circuits
- Electric water heaters
- Boring machines
- Analog precision reference circuits
- Planers
- Hydro power
- Surge protection circuits
- Series voltage regulation circuits
