Parameters |
Surface Mount |
YES |
Number of Pins |
10 |
Weight |
23.700201mg |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tape & Reel (TR) |
JESD-609 Code |
e4 |
Pbfree Code |
yes |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
1 (Unlimited) |
Number of Terminations |
10 |
ECCN Code |
EAR99 |
Terminal Finish |
Nickel/Palladium/Gold (Ni/Pd/Au) |
Subcategory |
Switching Regulator or Controllers |
Terminal Position |
DUAL |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Terminal Pitch |
0.5mm |
Base Part Number |
TPS61006 |
Function |
Step-Up |
Number of Outputs |
1 |
Efficiency |
90 % |
Output Voltage |
3.3V |
Output Type |
Fixed |
Max Output Current |
200mA |
Operating Supply Voltage |
3.3V |
Voltage - Input (Min) |
0.8V |
Input Voltage-Nom |
1.2V |
Analog IC - Other Type |
SWITCHING REGULATOR |
Output Configuration |
Positive |
Current - Output |
1.3A Switch |
Quiescent Current |
50μA |
Max Output Voltage |
3.3V |
Topology |
Boost |
Control Mode |
CURRENT-MODE |
Frequency - Switching |
500kHz |
Control Technique |
PULSE WIDTH MODULATION |
Synchronous Rectifier |
No |
Min Output Voltage |
3.3V |
Height |
1.07mm |
Length |
3mm |
Width |
3mm |
Thickness |
1.02mm |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
Factory Lead Time |
1 Week |
Lifecycle Status |
ACTIVE (Last Updated: 2 days ago) |
Mounting Type |
Surface Mount |
Package / Case |
10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
TPS61006DGSR Overview
It is designed to provide optimal performance by utilizing the Tape & Reel (TR) package. During the development of this harley voltage regulator, 10 terminations were made. There are two types of analog ICs in this voltage regulator 12v: SWITCHING REGULATOR ICs, which are the ones used in older voltage regulator 12vs. Space savings are achieved by placing this voltage regulator in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package. There are 1 outputs configured on the voltage regulator. Fixed outputs are generated on the output pins of this adjusting voltage regulator. A Surface Mount mounting is required for this switching regulator. As long as its operating temperature is -40°C~85°C TA, dc to dc voltage regulator should perform well. This voltage regulator 12v reaches a switching frequency of 500kHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 0.8V. As a result of the 1.3A Switch output current, voltage regulator offers maximum flexibility in design. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. The voltage regulator 12v is designed to provide a nominal input voltage of 1.2V for operation. In terms of category, this voltage regulator 12v falls into the Switching Regulator or Controllers category. As part of the TPS61006 series of regulators, the voltage regulators can be found. The voltage DC DC switching regulator can produce is 3.3V volts. 10 pins are used for switching regulator operation. The output voltage for this switching regulator should be kept at 3.3V at least. In order to meet the requirements of the switching regulator operation, the maximum output current reaches 200mA A. An output voltage of 3.3V is provided by this regulator voltage. Switching regulators operate at 3.3V supply voltages. There is no external influence on harley voltage regulator as it consumes 50μA A of quiescent current.
TPS61006DGSR Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 3.3V
TPS61006DGSR Applications
There are a lot of Texas Instruments TPS61006DGSR Voltage Regulators applications.
- Imported equipment
- Printing
- Smart grid
- Alternators
- Overvoltage protection circuits in TV sets
- ATMs
- Window air conditioners
- Computer application technology
- seismic instrument power circuits
- Magnetohydrodynamic power