TPS61012DGS
| Parameters | |
|---|---|
| Min Output Voltage | 1.8V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 23.700201mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Base Part Number | TPS61012 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 1.8V |
| Output Type | Fixed |
| Operating Supply Voltage | 1.8V |
| Voltage - Input (Min) | 0.8V |
| Input Voltage-Nom | 1.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 540mA Switch |
| Quiescent Current | 50μA |
| Max Output Voltage | 1.8V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
TPS61012DGS Overview
There is an optimized performance in this voltage regulator because it utilizes the Tube package. Throughout this voltage regulator, there are 10 terminations. A SWITCHING REGULATOR analog IC is used in this voltage regulator 12v, which is the type of analog IC that this voltage regulator 12v is equipped with. This harley voltage regulator is available in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package for the purpose of space saving. DC DC switching regulator is configured with 1 outputs. DC DC switching regulators like this one generate Fixed outputs on their output pins to handle the power management. Surface Mount-mounting is compatible with this switching regulator. When operating, adjusting voltage regulator's operating temperature should be kept at -40°C~85°C TA. In this voltage regulator 12v, the switching frequency is 500kHz. Despite its low input voltage, this voltage regulator can operate. A maximum design flexibility is provided by the 540mA Switch output current of voltage regulator. As a result of its peak reflow temperature, this voltage regulator is virtually indestructible. An input voltage of 1.2V is required to meet the requirements of the switching regulator operation. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. In this case, the DC/DC regulator belongs to the family TPS61012. The adjusting voltage regulator's output voltage is maintain at 1.8V. During switching regulator operation, 10 pins are used. The output voltage for this switching regulator should be kept at 1.8V at least. Using this voltage regulator 12v, you will be able to get the maximum output voltage of 1.8V. DC-DC switching regulator with 1.8V supply voltage. An external factor does not affect harley voltage regulator's ability to consume 50μA A of quiescent current.
TPS61012DGS Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 1.8V
TPS61012DGS Applications
There are a lot of Texas Instruments TPS61012DGS Voltage Regulators applications.
- Electrical power transmission
- Domestic water pumps
- Correction machines
- Sensitive electronic devices
- Magnetohydrodynamic power
- Gear/thread machining machines
- Access control systems
- Hydro power
- Overvoltage protection circuits in TV sets
- PSRR circuits
