TPS61016DGS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 23.700201mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.5mm |
| Frequency | 780kHz |
| Base Part Number | TPS61016 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 95 % |
| Output Voltage | 3.3V |
| Output Type | Fixed |
| Operating Supply Voltage | 3.3V |
| Voltage - Input (Min) | 0.8V |
| Input Voltage-Nom | 1.2V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Current - Output | 1.07A Switch |
| Quiescent Current | 50μA |
| Max Output Voltage | 3.3V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 500kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 3.3V |
| Nominal Output Voltage | 3.3V |
| Height | 1.07mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 1.02mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61016DGS Overview
Using the Tube package, this voltage regulator optimizes the performance of the voltage regulator 12v. In this voltage regulator, there are 10 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. The harley voltage regulator is available as a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) package to save space. In this case, DC DC switching regulator has 1 outputs configured to it. On its output pins, this adjusting voltage regulator generates Fixed output. As the name implies, this voltage regulator 12v is designed for mounting on a Surface Mount bracket. Voltage regulators should be operated at -40°C~85°C TA temperature while operating. A DC-DC switching regulator such as this one switches at 500kHz. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. A maximum design flexibility is provided by the 1.07A Switch output current of voltage regulator. A regulator with this 260 peak reflow temperature is essentially indestructible. An input voltage of 1.2V is required to meet the requirements of the switching regulator operation. The regulator voltage is included in the Switching Regulator or Controllers subcategory of voltage regulators. In the particular voltage regulators, the TPS61016 family is represented. Voltage of voltage regulator can be delivered at 3.3V volts. The switching regulator operation is carried out by 10 pins. In order to use this voltage regulator 12v at its full potential, the output voltage should be kept at at least 3.3V. An output voltage of 3.3V is provided by this regulator voltage. DC-DC switching regulator with supply voltage 3.3V. Voltage regulator consumes 50μA A of quiescent current without being affected by outside forces. A dc to dc voltage regulator's frequency of 780kHz is sufficient for maintaining high accuracy.
TPS61016DGS Features
1 outputs
Peak reflow temperature (Cel) of 260
10 pins
Operating supply voltage of 3.3V
TPS61016DGS Applications
There are a lot of Texas Instruments TPS61016DGS Voltage Regulators applications.
- Smoke prevention equipment
- Power supplies of electronic gadgets
- Automatic testing equipment
- Various precision measuring detectors
- Thermal power
- Radio equipment
- PSRR circuits
- Arc suppression circuits
- Hydraulic presses
- Automatic plug-in machines
