TPS61030PWPR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Contact Plating | Gold |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-PowerTSSOP (0.173, 4.40mm Width) |
| Number of Pins | 16 |
| Weight | 62.709145mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Frequency | 600kHz |
| Base Part Number | TPS61030 |
| Function | Step-Up |
| Number of Outputs | 1 |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 1A |
| Operating Supply Voltage | 5.5V |
| Voltage - Input (Min) | 1.8V |
| Input Voltage-Nom | 2.4V |
| Analog IC - Other Type | BATTERY CHARGE CONTROLLER |
| Output Configuration | Positive |
| Current - Output | 3.6A Switch |
| Quiescent Current | 20μA |
| Max Output Voltage | 5.5V |
| Topology | Boost |
| Control Mode | CURRENT-MODE |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 1.8V |
| Height | 1.2mm |
| Length | 5mm |
| Width | 4.4mm |
| Thickness | 1mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61030PWPR Overview
For optimal performance, this voltage regulator uses the Cut Tape (CT) package. This harley voltage regulator has 16 terminations. There is a BATTERY CHARGE CONTROLLER type analog IC in this voltage regulator 12v that is used to convey analog signals. There is a 16-PowerTSSOP (0.173, 4.40mm Width) package available for this voltage regulator, as DC DC switching regulator is space-saving. There are 1 outputs on DC DC switching regulator. Adjusting voltage regulator's output pins generate Adjustable output. Surface Mount-mount switching regulator. Keeping dc to dc voltage regulator's operating temperature at -40°C~85°C TA is essential when operating. A dc to dc voltage regulator's minimum input voltage of 1.8V is required for this voltage regulator to operate. As a result of the 3.6A Switch output current, voltage regulator offers maximum flexibility in design. With its peak reflow temperature of 260, this voltage regulator is essentially indestructible. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 2.4V. A voltage regulator 12v such as this falls under the Switching Regulator or Controllers category and belongs to this category. DC/DC regulators such as this one belong to the TPS61030 family of products. The voltage DC DC switching regulator can produce is 5.5V volts. There are 16 pins used for switching regulator operation. The output voltage of this voltage regulator 12v should at least be set at 1.8V volts at all times. For switching regulator maximum operation, dc to dc voltage regulator delivers 1A A. The maximum voltage of voltage regulator 12v DC DC switching regulator can produce is 5.5V, which is the highest available. DC-DC switching regulator with supply voltage 5.5V. External factors do not affect voltage regulator's consumption of 20μA A of quiescent current. At a frequency of 600kHz, dc to dc voltage regulator is capable of maintaining high accuracy.
TPS61030PWPR Features
1 outputs
Peak reflow temperature (Cel) of 260
16 pins
Operating supply voltage of 5.5V
TPS61030PWPR Applications
There are a lot of Texas Instruments TPS61030PWPR Voltage Regulators applications.
- CMM
- Elevator lighting
- Domestic water pumps
- Grinders
- Production lines
- Radio equipment
- Computed tomography (CT)
- Servo drive system
- Television equipment
- Flexible manufacturing cells
