TPS61040DBVRG4
| Parameters | |
|---|---|
| Max Output Current | 90mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Output Current | 90mA |
| Max Supply Current | 400mA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 90mA |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61040 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 86 % |
| Output Type | Adjustable |
TPS61040DBVRG4 Overview
It saves board space with the SC-74A, SOT-753 package. Typically, LED drivers have 1 outputs.As far as mounting is concerned, Surface Mount is adopted.With high efficiency and reliable performance, it emerges as a DC DC Regulator.The LED driver is capable of operating at a temperature of -40°C~85°C TA.Backlight has many benefits.5 terminations are designed for its operation.The base of this board is configured as 5 pins.LED drivers have a base part number of TPS61040.It consists of 5 pins.Further, its characteristics allow it to be classified as Switching Regulator or Controllers.At its minimal input voltage, it operates at 1.8V.Supply current cannot exceed 6V.When the maximum supply current is less than 400mA, the device is able to provide a high level of efficiency.You can supply 90mA current to the load.In order to power systems, 6V voltage is needed.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.LED drivers can deliver all benefits of 90mA due to their maximum output current.Absent external factors, there is 28μA consumption of current.Voltages above 28V should not be allowed.While operating the device, the circuit has 2.4V volts.It maintains a minimum voltage of 1.8V.A Adjustable output type is equipped with this device.
TPS61040DBVRG4 Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61040DBVRG4 Applications
There are a lot of Texas Instruments TPS61040DBVRG4 LED Driver ICs applications.
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- Stage Lighting and Signage
- Panel lighting
- LED Lighting PFCs, Linear Dimmable
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Down lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Medical surgery lighting
- Down lights
