TPS61040DDCT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-5 Thin, TSOT-23-5 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Frequency | 1MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61040 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 86 % |
| Max Output Current | 90mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Output Current | 400mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Voltage - Output | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Height | 1.1mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 870μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61040DDCT Overview
Board space is saved by its SOT-23-5 Thin, TSOT-23-5 package.The LED driver's design uses 1 outputs.We are using Surface Mount as the mounting method.When it emerges as a DC DC Regulator, it performs extremely well and is highly reliable.The led light driver is capable of operating at the operating temperature of -40°C~85°C TA.Backlight has many advantages.Using the frequency of 1MHz, it operates.The operation of this system is supported by 5 terminations.There are 5 pins on the base of this LED driver.Part number TPS61040 represents this LED driver.Its output voltage is 28V.5 pins are on the device.As a result, its characteristics can also be categorized as Switching Regulator or Controllers.The minimal input voltage is 1.8V.When the maximum supply current is allowed, the value reaches 6V.When the maximum supply current is less than 50μA, the device is able to provide a high level of efficiency.The load is capable of receiving 400mA current.It is necessary to have 6V voltages inside systems to power them.When operating at the maximum output current of 90mA, it is capable of providing all the benefits associated with LED drivers.There is no external factor that consumes current when there is 28μA current consumption.Device operation requires 2.4V volts from the circuit.
TPS61040DDCT Features
Available in the SOT-23-5 Thin, TSOT-23-5 package
Operating temperature of -40°C~85°C TA
Frequency of 1MHz
Operating with the supply voltage of 6V
TPS61040DDCT Applications
There are a lot of Texas Instruments TPS61040DDCT LED Driver ICs applications.
- Stage and Studio lighting
- LED Lightings for Industrial Equipment
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- Other Electronic Devices
- OLED power supply for portable equipment
- Down lighting
- A- lamps
- Dimmable LED for vehicle interiors
- Museum lighting
