TPS61040DRVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61040 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 86 % |
| Output Type | Adjustable |
| Max Output Current | 90mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Power Dissipation | 500mW |
| Output Current | 400mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 90mA |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61040DRVR Overview
Save board space with 6-WDFN Exposed Pad package. In this LED driver, there are 1 outputs.Surface Mount is used to mount the led light driver.In this case, the DC DC Regulator emerges as highly efficient and reliable.-40°C~85°C TA is the operating temperature of the led driver.The benefits it provides to Backlight are considerable.A termination of 6 is used to operate the LED driver.This module has 6 pins as its base.It can be found under the part number TPS61040.There are 6 pins on this device.According to its characteristics, it is also classified into Switching Regulator or Controllers.A minimal input voltage of 1.8V is required for it to operate.It is possible to supply current up to 6V.It is possible to obtain a high efficiency with this device when the maximum supply current is less than 50μA.A load can be supplied with 400mA current.Powering systems requires an internal voltage of 6V.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.At maximum output current 90mA, it will deliver all the benefits of a LED driver.There is no external factor that can consume current, so 28μA current is consumed.If the output voltage exceeds 28V, it should be corrected.A circuit operated by the device has 2.4V volts.The minimal voltage it outputs maintains at 1.8V.There is an output type of Adjustable on this device.
TPS61040DRVR Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61040DRVR Applications
There are a lot of Texas Instruments TPS61040DRVR LED Driver ICs applications.
- General lighting
- LED backlight driver for LCD displays for portable equipment
- Linear fluorescent
- Stage and Studio lighting
- OLED power supply for portable equipment
- Medical surgery lighting
- White LED Backlight for portable equipment
- Museum lighting
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
