TPS61040DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61040 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 86 % |
| Output Type | Adjustable |
| Max Output Current | 90mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Power Dissipation | 688mW |
| Output Current | 90mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61040DRVT Overview
The 6-WDFN Exposed Pad package conserves board space. LED drivers with this design have 1 outputs.This mounting method is Surface Mount.In this case, the DC DC Regulator emerges as highly efficient and reliable.The led light driver can work at -40°C~85°C TA.There are considerable benefits for Backlight.It operates with 6 terminations.With a base of 6, this LED light driver is configured.LED drivers have a base part number of TPS61040.In addition, it has 6 pins.In addition, it can also be categorized into Switching Regulator or Controllers based on its characteristics.A minimal input voltage of 1.8V is required for it to operate.When the maximum supply current is allowed, it reaches 6V.This device is able to provide high efficiency when the maximal supply current should be less than 50μA.90mA is the maximum amount of current that can be supplied to the load.Systems require 6V voltage to operate.Having the switching frequency at 1MHz enables this electronic component to perform at its best.When operating at the maximum output current of 90mA, it is capable of providing all the benefits associated with LED drivers.28μA current is consumed in the case of no external factors.It is recommended that the output voltage be no higher than 28V.When using the device, there is a voltage of 2.4V volts assigned to the circuit.It maintains a voltage of 1.8V at its minimum output.This device is equipped with an output type of Adjustable.
TPS61040DRVT Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61040DRVT Applications
There are a lot of Texas Instruments TPS61040DRVT LED Driver ICs applications.
- Flicker-free LED Lighting using R1580N
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Refrigeration lighting
- Constant Voltage Power Source for portable equipment
- Gallery lighting
- Dimmable LED for vehicle interiors
- High-end retail lighting
- LED backlight driver for LCD displays for portable equipment
- Panel lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
