TPS61040DRVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 5 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61040 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 86 % |
| Output Type | Adjustable |
| Max Output Current | 90mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Power Dissipation | 1.3W |
| Output Current | 400mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 350mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61040DRVTG4 Overview
It saves board space with the 6-WDFN Exposed Pad package. It has 1 outputs for LED drivers.Surface Mount is used for mounting the led light driver.There is no doubt that this is a very efficient and reliable DC DC Regulator.This LED driver can be operated at a temperature of -40°C~85°C TA. It provides considerable benefits for Backlight.6 terminations are used in its operation.To form its configuration, 6 pins are used.It can be found under the part number TPS61040.There are 6 pins on it.According to its characteristics, it is also categorized into Switching Regulator or Controllers.Initially, it accepts a voltage of 1.8V.In terms of supply current, 6V is the maximum value.When the maximum supply current is below 50μA, it is capable of delivering high efficiency.In this case, the load can only be supplied with 400mA current.Powering systems requires 6V voltages.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.Even when operating at a maximal output current of 90mA, it is capable of delivering all the benefits of a LED driver.There is no external factor that consumes current when there is 28μA current consumption.It is important to keep the output voltage below 28V.When the device is operated, 2.4V volts are applied to the circuit.A voltage of 1.8V is maintained as the minimal voltage it outputs.The output type of the device is Adjustable.
TPS61040DRVTG4 Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61040DRVTG4 Applications
There are a lot of Texas Instruments TPS61040DRVTG4 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- Down lighting
- Scanners and Handy Terminals
- Linear fluorescent
- Architectural lighting
- LED backlight driver for LCD displays for Tablets and Note PCs
- Portable lighting
- Street lighting
- Constant Voltage Power Source for portable equipment
- Medical surgery lighting
