TPS61040QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 4 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61040 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 90mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Power Dissipation | 357mW |
| Output Current | 90mA |
| Max Supply Current | 50μA |
| Quiescent Current | 50μA |
| Voltage - Output | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Current - Output / Channel | 400mA Switch |
| Internal Switch(s) | Yes |
| Switching Frequency | 1MHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61040QDBVRQ1 Overview
The SC-74A, SOT-753 package is used for saving board space. LED drivers with this design have 1 outputs.The mounting method is Surface Mount.When it emerges as a DC DC Regulator, it shows high-performance and reliability.This LED driver can be operated at a temperature of -40°C~125°C TJ. A number of benefits are available to Backlight.It operates with 5 terminations.In this LED driver, the base is configured as 5.It's under the TPS61040 base part number.28V is the voltage output.The device has 5 pins.Additionally, it can be classified as Switching Regulator or Controllers based on its characteristics.This device requires a minimum input voltage of 1.8V.It is possible to supply current up to 6V.Its high efficiency is based on the fact that the maximal supply current should not exceed 50μA.90mA is the maximum amount of current that can be supplied to the load.It is necessary to power systems with a voltage of 6VElectronic components can function properly when their switching frequency is set to 1MHz.LED drivers deliver all their benefits with a maximum output current of 90mA.LED drivers in the Automotive, AEC-Q100 series are essential for a wide range of applications.No external factors cause 50μA current to be consumed.The circuit is assigned 2.4V volts when the device is in operation.It is equipped with the output type of Adjustable.
TPS61040QDBVRQ1 Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~125°C TJ
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61040QDBVRQ1 Applications
There are a lot of Texas Instruments TPS61040QDBVRQ1 LED Driver ICs applications.
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Amusement Machines
- Museum lighting
- General lighting
- Panel lighting
- Stage and Studio lighting
- LED Lightings for Inspection Devices
- Constant Voltage Power Source for portable equipment
- LED headlights
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
