TPS61041DBVRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61041 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 50mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Nominal Supply Current | 28μA |
| Output Current | 50mA |
| Max Supply Current | 28μA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 215mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 1.15mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61041DBVRG4 Overview
Its SC-74A, SOT-753 package is used to save board space. In LED drivers, the outputs are all set to 1.It is mounted using Surface Mount.DC DC Regulator emerges with high efficiency and reliability.It is able to work normally at the operating temperature of -40°C~85°C TA.There are considerable benefits for Backlight.It operates with 5 terminations.In this LED driver, the base is configured as 5.It is under the base part number TPS61041 that the LED driver can be found.This device contains 5 pins.Further, its characteristics allow it to be classified as Switching Regulator or Controllers.Initially, it accepts a voltage of 1.8V.In the case of supply current, there is a maximum value of 6V.As long as the maximum supply current is less than 28μA, this device is capable of providing high efficiency.Loads can only be powered by 50mA current.It is necessary to have 6V voltages inside systems to power them.This electronic component may perform its functions fully if the switching frequency is maintained at 1MHz.When operating with a maximum output current of 50mA, it can deliver all the benefits of a LED driver.There is no external factor that can consume current, so 28μA current is consumed.If the output voltage exceeds 28V, it should be corrected.A circuit operated by the device has 2.4V volts.The minimal voltage it outputs maintains at 1.8V.There is a type Adjustable output on this device.
TPS61041DBVRG4 Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61041DBVRG4 Applications
There are a lot of Texas Instruments TPS61041DBVRG4 LED Driver ICs applications.
- Stage and Studio lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Gallery lighting
- General lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Stage Lighting and Signage
- High-end retail lighting
- Other Electronic Devices
- Sports Facility Lighting
- White LED Backlight for portable equipment
