TPS61041DRVR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | TPS61041 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 50mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Power Dissipation | 500mW |
| Output Current | 250mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 215mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 50mA |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61041DRVR Overview
It saves board space with the 6-WDFN Exposed Pad package. For the design of these LED drivers, 1 outputs are used.It adopts the way of Surface Mount for mounting.The system emerges as a DC DC Regulator with high efficiency.The led light driver operates normally at -40°C~85°C TA. Backlight has considerable advantages.The system operates with a termination of 0.The LED light driver has a base configuration of 6 pins.There is a base part number TPS61041 for this LED driver.This device contains 6 pins.In addition to Switching Regulator or Controllers, it is also classified by its characteristics.As its minimal input voltage, it operates at a voltage of 1.8V.In terms of supply current, 6V is the maximum value.When the maximum supply current is below 50μA, the device can deliver high efficiency.There is no current available to supply to the load.It is necessary to have 6V voltages inside systems to power them.This electronic component may perform its functions fully if the switching frequency is maintained at 1MHz.At maximum output current 50mA, it will deliver all the benefits of a LED driver.There is no external factor that can consume current, so 28μA current is consumed.It is important that the output voltage does not exceed 28V.When using the device, there is a voltage of 2.4V volts assigned to the circuit.It maintains a voltage of 1.8V at its minimum output.There is a type Adjustable output on this device.
TPS61041DRVR Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61041DRVR Applications
There are a lot of Texas Instruments TPS61041DRVR LED Driver ICs applications.
- High-end retail lighting
- Medical surgery lighting
- Portable lighting
- OLED power supply for portable equipment
- Auxiliary lights for on-vehicle cameras
- General lighting
- LED headlights
- Industrial LED Lighting: Image Recognition Devices
- Constant Voltage Power Source for portable equipment
- Stage and Studio lighting
