TPS61041DRVT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Contact Plating | Gold |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61041 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 50mA |
| Input Voltage-Nom | 2.4V |
| Max Supply Voltage | 6V |
| Power Dissipation | 500mW |
| Output Current | 50mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Output Current per Channel | 215mA |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 215mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 50mA |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61041DRVT Overview
Space is saved using its 6-WDFN Exposed Pad package. LED drivers designed using this technology use 1 outputs.The led driver mounting is done by using Surface Mount.As a DC DC Regulator, it has high efficiency and reliability.It is capable of operating at a temperature of -40°C~85°C TA. There are considerable benefits for Backlight.It operates with terminations of 6.This module has 6 pins as its base.This LED driver can be found under the base part number TPS61041.6V is a maximum acceptable voltage for the supply.In addition, it is equipped with a total of 6 pins.Additionally, it can be classified as Switching Regulator or Controllers based on its characteristics.As its minimal input voltage, it operates at 1.8V.Currently, the supply current can only reach 6V.Whenever the supply current is lower than 50μA, it can provide high efficiency.The load is capable of receiving 50mA current.This electronic component can fully perform when the switching frequency is 1MHz.LED drivers deliver all their benefits with a maximum output current of 50mA.In the absence of external factors, there is 28μA consumption of current.It is important that the output voltage does not exceed 28V.While operating the device, the circuit has 2.4V volts.A voltage of 1.8V is maintained as the minimal voltage it outputs.It is equipped with the output type of Adjustable.
TPS61041DRVT Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Switching frequency of 1MHz
TPS61041DRVT Applications
There are a lot of Texas Instruments TPS61041DRVT LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED headlights
- Stage and Studio lighting
- Scanners and Handy Terminals
- Museum lighting
- Auxiliary lights for on-vehicle cameras
- Amusement Machines
- Flicker-free LED Lighting using R1580N
- General lighting
- Medical surgery lighting
