TPS61041DRVTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 6-WDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 6 |
| Weight | 9.695537mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61041 |
| Pin Count | 6 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 50mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Output Current | 50mA |
| Quiescent Current | 28μA |
| Max Output Voltage | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Min Output Voltage | 1.8V |
| Current - Output / Channel | 215mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Switching Frequency | 1MHz |
| Height | 800μm |
| Length | 2mm |
| Width | 2mm |
| Thickness | 750μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61041DRVTG4 Overview
The 6-WDFN Exposed Pad package saves space on the board. This LED driver has 1 outputs.The led light driver is mounted using Surface Mount.With high efficiency, it appears as a DC DC Regulator.The led light driver operates normally at -40°C~85°C TA. There are many benefits for Backlight.It operates using 6 terminations.This LED driver is configured with a base of 6 pins.A base part number of TPS61041 is associated with this LED driver.The device has a pin count of 6.According to its characteristics, it is also categorized into Switching Regulator or Controllers.With a minimum input voltage of 1.8V volts, it can operate.The maximum supply current is 6V.You can supply 50mA current to the load.In order for systems to function, a voltage of 0 is required internally.As long as the switching frequency is maintained at 1MHz, this electronic component is able to perform all of its functions properly.It is capable of delivering all benefits of a LED driver when operating with the maximal output current of 50mA.A current of 28μA is consumed in the absence of external influences.Voltages above 28V should not be allowed.While operating the device, the circuit has 2.4V volts.The voltage it outputs stays at 1.8V.There is a type Adjustable output on this device.
TPS61041DRVTG4 Features
Available in the 6-WDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61041DRVTG4 Applications
There are a lot of Texas Instruments TPS61041DRVTG4 LED Driver ICs applications.
- Stage Lighting and Signage
- Portable lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Amusement Machines
- Refrigeration lighting
- Linear fluorescent
- Medical surgery lighting
- Other Electronic Devices
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
