TPS61041QDBVRQ1
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Mounting Type | Surface Mount |
| Package / Case | SC-74A, SOT-753 |
| Surface Mount | YES |
| Number of Pins | 5 |
| Weight | 13.012431mg |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | Automotive, AEC-Q100 |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 5 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Base Part Number | TPS61041 |
| Pin Count | 5 |
| Number of Outputs | 1 |
| Output Type | Adjustable |
| Max Output Current | 50mA |
| Operating Supply Voltage | 6V |
| Input Voltage-Nom | 2.4V |
| Power Dissipation | 357mW |
| Output Current | 50mA |
| Max Supply Current | 50μA |
| Quiescent Current | 28μA |
| Voltage - Output | 28V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Control Mode | CURRENT-MODE |
| Max Input Voltage | 6V |
| Control Technique | PULSE FREQUENCY MODULATION |
| Current - Output / Channel | 250mA Switch |
| Internal Switch(s) | Yes |
| Switching Frequency | 1MHz |
| Height | 1.45mm |
| Length | 2.9mm |
| Width | 1.6mm |
| Thickness | 1.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61041QDBVRQ1 Overview
The board's SC-74A, SOT-753 package saves space. As part of the design of this LED driver, there are 1 outputs that have been used.This mounting method is Surface Mount.DC DC Regulator emerges with high efficiency and reliability.-40°C~125°C TJ is the operating temperature and it works fine.There are considerable benefits for Backlight.The system operates with a termination of 0.There are 5 pins on the base of this LED driver.A base part number of TPS61041 is associated with this LED driver.Its output voltage is 28V.In this device, there are 5 pins.In addition, it can also be categorized into Switching Regulator or Controllers based on its characteristics.With a minimum input voltage of 1.8V volts, it can operate.There is 6V maximum value for supply current.If the maximum supply current is less than 50μA, the device is capable of providing high efficiency.Loads can only be powered by 50mA current.The power of systems depends on having 6V voltages inside.This electronic component can fully perform when the switching frequency is 1MHz.LED drivers are able to deliver all the benefits of LEDs at their maximum output current of 50mA.A component of the Automotive, AEC-Q100 series, this LED driver is widely used in a variety of applications.When no external factors are present, there is 28μA current consumption.While operating the device, the circuit has 2.4V volts.A Adjustable output type is equipped with this device.
TPS61041QDBVRQ1 Features
Available in the SC-74A, SOT-753 package
Operating temperature of -40°C~125°C TJ
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61041QDBVRQ1 Applications
There are a lot of Texas Instruments TPS61041QDBVRQ1 LED Driver ICs applications.
- Medical surgery lighting
- A- lamps
- Stage Lighting and Signage
- Stage and Studio lighting
- LED Lightings for Industrial Equipment
- Auxiliary lights for on-vehicle cameras
- Panel lighting
- White LED Backlight for portable equipment
- Other Electronic Devices
- Scanners and Handy Terminals
