TPS61042DRBRG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 3 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| Termination | SMD/SMT |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS61042 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 30mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.8V |
| Output Current | 30mA |
| Quiescent Current | 38μA |
| Supply Current-Max | 65mA |
| Max Output Voltage | 28V |
| Voltage - Output | 27.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 6V |
| Min Output Voltage | 1.8V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 60mA Switch |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61042DRBRG4 Overview
It saves board space with the 8-VDFN Exposed Pad package. Typically, LED drivers have 1 outputs.To mount, use Surface Mount.It emerges as a DC DC Regulator, which is efficient and reliable.It is capable of working normally at -40°C~85°C TA.Taking advantage of Backlight has considerable benefits.In this case, there are 8 terminations.The LED light driver is configured with a base of 0 pins.There are estimated to be 1 segments.There is a base part number TPS61042 for this LED driver.A maximum supply voltage of 6V is acceptable.The voltage output by it is 27.5V.On this device, there are 8 pins.In addition, it can be classified as Display Drivers according to its characteristics.A minimal input voltage of 1.8V is required for it to operate.It works with the minimal supply voltage of 1.8V to meet highest efficiency standards.The maximum supply current is 6V.There is no current that can be supplied to the load.The electronic component can fully perform its functions if the switching frequency is maintained at 1MHz.LED drivers deliver all their benefits with a maximum output current of 30mA.A current of 38μA is consumed in the absence of external influences.It is important that the output voltage does not exceed 28V.It maintains a 1.8V minimum voltage output.The output type of the device is Adjustable.
TPS61042DRBRG4 Features
Available in the 8-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
TPS61042DRBRG4 Applications
There are a lot of Texas Instruments TPS61042DRBRG4 LED Driver ICs applications.
- OLED power supply for portable equipment
- Panel lighting
- Portable lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Architectural lighting
- Flicker-free LED Lighting using R1580N
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Museum lighting
- Stage and Studio lighting
- LED Lightings for Industrial Equipment
