TPS61042DRBTG4
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS61042 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Efficiency | 85 % |
| Output Type | Adjustable |
| Max Output Current | 30mA |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Power Dissipation | 148mW |
| Output Current | 30mA |
| Max Supply Current | 65μA |
| Quiescent Current | 38μA |
| Max Output Voltage | 28V |
| Voltage - Output | 27.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Min Output Voltage | 1.8V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 60mA Switch |
| Internal Switch(s) | Yes |
| High Level Output Current | 30mA |
| Dimming | PWM |
| Number of Segments | 1 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61042DRBTG4 Overview
The board's 8-VDFN Exposed Pad package saves space. For the design of this LED driver, 1 outputs are used.This mounting method is Surface Mount.This emerges as a DC DC Regulator with high efficiency and reliability.It is possible for the led driver ic to operate normally at -40°C~85°C TA.Backlight benefits significantly from the program.There are 8 terminations that are designed to operate with it.It has a base configuration of 8 pins.There are estimated to be 1 segments.This LED driver has the part number TPS61042.Its output voltage is 27.5V.This device contains 8 pins.Furthermore, it can be categorized as Display Drivers based on its characteristics.A minimal input voltage of 1.8V is required for it to operate.Whenever the maximum supply current is allowed, the value reaches 6V.If the maximum supply current is less than 65μA, the device is capable of providing high efficiency.There is no current available to supply to the load.In order to power systems, 6V voltage is needed.When the switching frequency is maintained at 1MHz, this electronic component is able to fully play its functions.LED drivers deliver all their benefits with a maximum output current of 30mA.In the absence of external factors, 38μA current is consumed.If the output voltage exceeds 28V, it should be corrected.1.8V is the minimal voltage it outputs.The output type is Adjustable.
TPS61042DRBTG4 Features
Available in the 8-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Operating with the supply voltage of 6V
Switching frequency of 1MHz
TPS61042DRBTG4 Applications
There are a lot of Texas Instruments TPS61042DRBTG4 LED Driver ICs applications.
- LED Lighting PFCs, Linear Dimmable
- OLED power supply for portable equipment
- Refrigeration lighting
- Other Electronic Devices
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- LED Lightings for Inspection Devices
- Industrial LED Lighting: Image Recognition Devices
- Linear fluorescent
- Dimmable LED for vehicle interiors
- Stage and Studio lighting
