TPS61043DRBR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 2 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-VDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Weight | 22.906415mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Backlight |
| Subcategory | Display Drivers |
| Max Power Dissipation | 370mW |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.65mm |
| Base Part Number | TPS61043 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Max Output Current | 30mA |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 1.8V |
| Power Dissipation | 370mW |
| Output Current | 30mA |
| Max Supply Current | 65μA |
| Quiescent Current | 38μA |
| Max Output Voltage | 16.9V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 1.8V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Min Output Voltage | 1.8V |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 60mA |
| Internal Switch(s) | Yes |
| Dimming | PWM |
| Number of Segments | 4 |
| Switching Frequency | 1MHz |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 880μm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61043DRBR Overview
8-VDFN Exposed Pad package saves space on the board. Typically, LED drivers have 1 outputs.It is mounted using Surface Mount.DC DC Regulator emerges with high efficiency and reliability.-40°C~85°C TA is the operating temperature for the led light driver.The benefits of Backlight are considerable.It operates using 8 terminations.It has a base of 8 pins.Based on our estimates, there are 4 segments.LED drivers have a base part number of TPS61043.6V is a reasonable voltage.8 pins are available on the device.As a result, it can also be classified as Display Drivers.The minimum input voltage for this device is 1.8V.This system is designed to operate at a minimum voltage of 1.8V to achieve maximum efficiency.In terms of supply current, there is a maximum value of 6V.A minimal supply current is required in order for this device to provide high efficiency.In this case, the load can only be supplied with 30mA current.This electronic component can fully perform its functions when the switching frequency is kept at 1MHz.A LED driver that operates at 30mA output current provides all the benefits of a LED driver.Absent external factors, there is 38μA consumption of current.Voltages should not exceed 16.9V volts at the output.This device maintains a minimal voltage of 1.8V.
TPS61043DRBR Features
Available in the 8-VDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Supply voltage of 3.6V
Switching frequency of 1MHz
TPS61043DRBR Applications
There are a lot of Texas Instruments TPS61043DRBR LED Driver ICs applications.
- White LED Backlight for portable equipment
- Stage Lighting and Signage
- Auxiliary lights for on-vehicle cameras
- Gallery lighting
- Sports Facility Lighting
- General lighting
- Portable lighting
- LED headlights
- Replacement lamps
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
