TPS61052DRCR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 6 days ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-VFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Weight | 26.109911mg |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e4 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 2 (1 Year) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 2.4W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | TPS61052 |
| Pin Count | 10 |
| Number of Outputs | 1 |
| Max Output Current | 1.2A |
| Operating Supply Voltage | 6V |
| Supply Voltage-Max (Vsup) | 6V |
| Output Current | 1.2A |
| Quiescent Current | 8.5mA |
| Voltage - Output | 5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.2A Flash |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 1mm |
| Length | 3mm |
| Width | 3mm |
| Thickness | 900μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61052DRCR Overview
10-VFDFN Exposed Pad package saves space on the board. Typically, LED drivers have 1 outputs.The led driver mounting is done by using Surface Mount.It emerges as a DC DC Regulator, which is efficient and reliable.If the led driver ic is set to -40°C~85°C TA, it will work normally.There are significant benefits for Camera Flash.The system operates at a frequency of 2MHz.In this case, it operates with terminations of 0.There are 10 pins on its base.There are estimated to be 1 segments.The base part number for this LED driver is TPS61052.There is 5.5V voltage output from the device.10 pins are used on the device.Additionally, it is categorized into Display Drivers according to its characteristics.The minimal input voltage is 2.5V.Supply current cannot exceed 6V.1.2A is the maximum amount of current that can be supplied to the load.Systems require 6V voltage to operate.A LED driver that operates at 1.2A output current provides all the benefits of a LED driver.When no external factors are present, there is 8.5mA current consumption.
TPS61052DRCR Features
Available in the 10-VFDFN Exposed Pad package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
Operating with the supply voltage of 6V
TPS61052DRCR Applications
There are a lot of Texas Instruments TPS61052DRCR LED Driver ICs applications.
- Museum lighting
- General LED Lighting: Down-lights, Base-lights, Ceiling Lights, Exterior Lights
- Medical surgery lighting
- LED backlight driver for LCD displays for portable equipment
- Street lighting
- Scanners and Handy Terminals
- LED backlight driver for LCD displays for Tablets and Note PCs
- Replacement lamps
- Flicker-free LED Lighting using R1580N
- Linear fluorescent
