TPS61052YZGR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Lifecycle Status | ACTIVE (Last Updated: 1 day ago) |
| Contact Plating | Copper, Silver, Tin |
| Mounting Type | Surface Mount |
| Package / Case | 12-UFBGA, DSBGA |
| Surface Mount | YES |
| Number of Pins | 12 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| JESD-609 Code | e1 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 12 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Applications | Camera Flash |
| Subcategory | Display Drivers |
| Max Power Dissipation | 1.1W |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Frequency | 2MHz |
| Base Part Number | TPS61052 |
| Pin Count | 12 |
| Number of Outputs | 1 |
| Max Output Current | 1.2A |
| Max Supply Voltage | 6V |
| Min Supply Voltage | 2.5V |
| Nominal Supply Current | 1.5A |
| Power Dissipation | 2.4W |
| Output Current | 1.2A |
| Max Supply Current | 8.5mA |
| Quiescent Current | 8.5mA |
| Voltage - Output | 5.5V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 2.5V |
| Max Input Voltage | 6V |
| Output Characteristics | CONSTANT-CURRENT |
| Input Characteristics | STANDARD |
| Current - Output / Channel | 1.2A Flash |
| Internal Switch(s) | Yes |
| fmax-Min | 0.4 MHz |
| Dimming | PWM |
| Number of Segments | 1 |
| Multiplexed Display Capability | NO |
| Height | 625μm |
| Length | 0m |
| Width | 0m |
| Thickness | 375μm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
TPS61052YZGR Overview
In order to save board space, the 12-UFBGA, DSBGA package is used. LED drivers designed using this technology use 1 outputs.Surface Mount is used for mounting the led light driver.In this case, it emerges as a DC DC Regulator with a high efficiency.The led light driver is capable of working normally at -40°C~85°C TA.The benefits it provides to Camera Flash are considerable.A frequency of 2MHz is used as the basis for operation.For its operation, terminations with a value of 0 are used.The configuration of the board is built around 12 pins.The number of segments is estimated to be 1.It is under the base part number TPS61052 that the LED driver can be found.6V is an acceptable maximum value for the supply voltage.The device has a voltage output of 5.5V volts.12 pins are included in it.According to its characteristics, it is also classified into Display Drivers.The minimum input voltage for this device is 2.5V.A minimum supply voltage of 2.5V is required to meet the highest efficiency standards.The maximum value of supply current is 6V.When the maximum supply current is less than 8.5mA, the device is able to provide a high level of efficiency.There is no current that can be supplied to the load.Even when operating at a maximal output current of 1.2A, it is capable of delivering all the benefits of a LED driver.A current of 8.5mA is consumed in the absence of external influences.
TPS61052YZGR Features
Available in the 12-UFBGA, DSBGA package
Operating temperature of -40°C~85°C TA
Frequency of 2MHz
Supply voltage of 3.6V
TPS61052YZGR Applications
There are a lot of Texas Instruments TPS61052YZGR LED Driver ICs applications.
- LED backlight driver for LCD displays for Tablets and Note PCs
- Linear fluorescent
- LED Lighting PFCs, Linear Dimmable
- Amusement Machines
- Sports Facility Lighting
- Refrigeration lighting
- Power source for accessories such as car audios, car navigation systems, and ETC systems
- Constant Voltage Power Source for portable equipment
- General lighting
- Auxiliary lights for on-vehicle cameras
